The Arm? Cortex?-M0 32-bit RISC engine, up to 256 Kbytes of Flash memory, and up to 32 Kbytes of SRAM, together with a wide variety of improved peripherals and I/Os, are all included in the STM32F030F4P6 microcontroller. All of the devices include common communication interfaces, including one 12-bit ADC, seven general-purpose 16-bit timers, and one advanced-control PWM timer, along with up to two I2Cs, up to two SPIs, and up to six USARTs.

Using a 2.4 to 3.6V power source, the STM32F030F4P6 microcontroller can function in the -40 to +85 °C temperature range. The development of low-power applications is made possible by a wide range of power-saving modes.

Devices for the STM32F030F4P6 microcontroller are available in four distinct packages with pin counts ranging from 20 to 64. There are several sets of peripherals included depending on the device selected. The list of suggested STM32F030F4P6 peripherals is summarized in the paragraphs below.

? Communication interfaces

– Up to two I2C interfaces

– Fast Mode Plus (1 Mbit/s) support on one or two I/Fs, with 20 mA current sink

– SMBus/PMBus support (on single I/F)

– Up to six USARTs supporting master synchronous SPI and modem control; one with auto baud rate detection

– Up to two SPIs (18 Mbit/s) with 4 to 16 programmable bit frames

? Serial wire debug (SWD)

? All packages ECOPACK?2

? 5-channel DMA controller

? One 12-bit, 1.0 μs ADC (up to 16 channels)

– Conversion range: 0 to 3.6 V

– Separate analog supply: 2.4 V to 3.6 V

? Calendar RTC with alarm and periodic wakeup from Stop/Standby

? 11 timers

– One 16-bit advanced-control timer for six-channel PWM output

– Up to seven 16-bit timers, with up to four IC/OC, OCN, usable for IR control decoding

– Independent and system watchdog timers

– SysTick timer

? Core: Arm? 32-bit Cortex?-M0 CPU, frequency up to 48 MHz

? Memories

– 16 to 256 Kbytes of Flash memory

– 4 to 32 Kbytes of SRAM with HW parity

? Reset and power management

– Digital & I/Os supply: VDD = 2.4 V to 3.6 V

– Analog supply: VDDA = VDD to 3.6 V

– Power-on/Power down reset (POR/PDR)

– Low power modes: Sleep, Stop, Standby

• Application control

  
  

• User interfaces

  
  

• Handheld equipment

  
  

• A/V receivers

  
  

• Digital TV

  
  

• PC peripherals

  
  

• GPS platforms

  
  

• Industrial applications

  
  

• PLCs

  
  

• Inverters

  
  

• Printers

  
  

• Scanners

  
  

• Alarm systems

  
  

• Video intercoms

  
  

• HVACs

  
  

  
  

  Lifecycle Status	ACTIVE (Last Updated: 7 months ago)
  Factory Lead Time	10 Weeks
  Contact Plating	Gold
  Mounting Type	Surface Mount
  Package / Case	20-TSSOP (0.173, 4.40mm Width)
  Surface Mount	YES
  Number of Pins	20
  Manufacturer Package Identifier	YA_ME
  Operating Temperature	-40°C~85°C TA
  Packaging	Tube
  Series	STM32F0
  Part Status	Active
  Moisture Sensitivity Level (MSL)	1 (Unlimited)
  Number of Terminations	20
  Max Power Dissipation	182mW
  Terminal Position	DUAL
  Terminal Form	GULL WING
  Supply Voltage	3.3V
  Frequency	48MHz
  Base Part Number	STM32F03
  Supply Voltage-Min (Vsup)	2.4V
  Interface	I2C, SPI, UART, USART
  Memory Size	16kB
  Oscillator Type	Internal
  Number of I/O	15
  RAM Size	4K x 8
  Voltage - Supply (Vcc/Vdd)	2.4V~3.6V
  uPs/uCs/Peripheral ICs Type	MICROCONTROLLER, RISC
  Core Processor	ARM® Cortex®-M0
  Peripherals	DMA, POR, PWM, WDT
  Program Memory Type	FLASH
  Core Size	32-Bit
  Program Memory Size	16KB 16K x 8
  Connectivity	I2C, SPI, UART/USART
  Supply Current-Max	23.2mA
  Bit Size	32
  Data Converter	A/D 11x12b
  Watchdog Timer	Yes
  Has ADC	YES
  DMA Channels	YES
  Data Bus Width	32b
  Number of Timers/Counters	5
  Core Architecture	ARM
  CPU Family	CORTEX-M0
  Number of ADC Channels	16
  Number of PWM Channels	6
  Number of I2C Channels	1
  Height	1.05mm
  Length	6.6mm
  Width	4.5mm
  REACH SVHC	No SVHC
  Radiation Hardening	No
  RoHS Status	ROHS3 Compliant
  Lead Free	Lead Free