Add to cart |
The STM32F207ICH6 is built on the high-performance Arm? Cortex?-M3 32-bit RISC CPU that operates at a frequency of up to 120 MHz. The STM32F207ICH6 includes high-speed embedded memories (Flash memory up to 1 Mbyte, up to 128 Kbytes of system SRAM, up to 4 Kbytes of backup SRAM, and a wide range of upgraded I/Os and peripherals connected to two APB buses, three AHB buses, and a 32-bit multi-AHB bus matrix). The STM32F207ICH6 MCU additionally includes an adaptive real-time memory accelerator (ART AcceleratorTM) that enables zero wait state program execution from Flash memory at CPU frequencies up to 120 MHz. Utilizing the CoreMark? benchmark, this performance has been verified.
Core: Arm? 32-bit Cortex?-M3 CPU (120 MHz max) with Adaptive real-time accelerator (ART Accelerator?) allowing 0-wait state execution performance from Flash memory, MPU, 150 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1)
Memories
Up to 1 Mbyte of Flash memory
512 bytes of OTP memory
Up to 128 + 4 Kbytes of SRAM
Flexible static memory controller that supports Compact Flash, SRAM, PSRAM, NOR, and NAND memories
LCD parallel interface, 8080/6800 modes
Clock, reset, and supply management
From 1.8 to 3.6 V application supply + I/Os
POR, PDR, PVD, and BOR
4 to 26 MHz crystal oscillator
Internal 16 MHz factory-trimmed RC
32 kHz oscillator for RTC with calibration
Internal 32 kHz RC with calibration
Low-power modes
Sleep, Stop and Standby modes
VBAT supply for RTC, 20 × 32 bit backup registers, and optional 4 Kbytes backup SRAM
3 × 12-bit, 0.5 μs ADCs with up to 24 channels and up to 6 MSPS in triple interleaved mode
2 × 12-bit D/A converters
General-purpose DMA: 16-stream controller with centralized FIFOs and burst support
Prototyping of IoT devices
Low power battery operated applications
Network projects
Easy to use for beginner-level DIYers and makers.
Projects requiring Multiple I/O interfaces with Wi-Fi and Bluetooth functionalities
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Factory Lead Time | 12 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 201-UFBGA |
| Surface Mount | YES |
| Number of Pins | 176 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | STM32F2 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Nickel/Gold (Ni/Au) |
| HTS Code | 8542.31.00.01 |
| Max Power Dissipation | 513mW |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.6mm |
| Frequency | 120MHz |
| Base Part Number | STM32F207 |
| Pin Count | 176 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2/3.3V |
| Supply Voltage-Min (Vsup) | 1.8V |
| Interface | CAN, Ethernet, I2C, I2S, SPI, UART, USART, USB |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 140 |
| RAM Size | 132K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M3 |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, LCD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | CANbus, Ethernet, I2C, IrDA, LINbus, Memory Card, SPI, UART/USART, USB OTG |
| Supply Current-Max | 81mA |
| Bit Size | 32 |
| Data Converter | A/D 24x12b; D/A 2x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 14 |
| Address Bus Width | 26 |
| Core Architecture | ARM |
| On Chip Program ROM Width | 8 |
| CPU Family | CORTEX-M3 |
| Length | 10mm |
| Height Seated (Max) | 0.61mm |
| REACH SVHC | No SVHC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STM32F207ICH6 Datasheet
+8613715157867