Add to cart |
The high-performance Arm? Cortex?-M3 32-bit RISC core, which operates at a frequency of up to 120 MHz, is the foundation of the STM32F207ZGT7 series. The family has a wide range of upgraded I/Os and peripherals connected to two APB buses, three AHB buses, and a 32-bit multi-AHB bus matrix, along with high-speed embedded memories (Flash memory up to 1 Mbyte, up to 128 Kbytes of system SRAM, up to 4 Kbytes of backup SRAM).
The devices additionally include an adaptive real-time memory accelerator (ART Accelerator?), which enables program execution from Flash memory with performance similar to zero wait states at CPU frequencies up to 120 MHz. The CoreMark? benchmark has been used to certify this performance.
Three 12-bit ADCs, two DACs, a low-power RTC, 12 general-purpose 16-bit timers, including two PWM timers for motor control, and two general-purpose 32-bit timers are all provided by the devices. a genuine number generator (RNG). Standard and cutting-edge communication interfaces are also included. An SDIO, an improved Flexible Static Memory Control (FSMC) interface, and a camera interface for CMOS sensors are examples of new, advanced peripherals. These devices are available in packages with at least 100 pins. The gadgets also include common peripherals.
Up to 140 I/O ports with interrupt capability:
– Up to 136 fast I/Os up to 60 MHz
– Up to 138 5 V-tolerant I/Os
Up to 15 communication interfaces
– Up to three I2C interfaces (SMBus/PMBus)
– Up to four USARTs and two UARTs (7.5 Mbit/s, ISO 7816 interface, LIN, IrDA, modem control)
– Up to three SPIs (30 Mbit/s), two with muxed I2S to achieve audio class accuracy via audio PLL or external PLL
– 2 × CAN interfaces (2.0B Active)
– SDIO interface
Advanced connectivity
– USB 2.0 full-speed device/host/OTG controller with on-chip PHY
– USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, on-chip full-speed PHY and ULPI
– 10/100 Ethernet MAC with dedicated DMA: supports IEEE 1588v2 hardware, MII/RMII
8- to 14-bit parallel camera interface (48 Mbyte/s max.)
CRC calculation unit
96-bit unique ID
Core: Arm? 32-bit Cortex?-M3 CPU (120 MHz max) with Adaptive real-time accelerator (ART Accelerator?) allowing 0-wait state execution performance from Flash memory, MPU,
150 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1)
Memories
– Up to 1 Mbyte of Flash memory
– 512 bytes of OTP memory
– Up to 128 + 4 Kbytes of SRAM
– Flexible static memory controller that supports Compact Flash, SRAM, PSRAM, NOR and NAND memories
– LCD parallel interface, 8080/6800 modes
Clock, reset and supply management
– From 1.8 to 3.6 V application supply + I/Os
– POR, PDR, PVD and BOR
– 4 to 26 MHz crystal oscillator
– Internal 16 MHz factory-trimmed RC
– 32 kHz oscillator for RTC with calibration
– Internal 32 kHz RC with calibration
Low-power modes
– Sleep, Stop and Standby modes
– VBAT supply for RTC, 20 × 32 bit backup registers, and optional 4 Kbytes backup SRAM
3 × 12-bit, 0.5 μs ADCs with up to 24 channels and up to 6 MSPS in triple interleaved mode
2 × 12-bit D/A converters
General-purpose DMA: 16-stream controller with centralized FIFOs and burst support
Up to 17 timers
– Up to twelve 16-bit and two 32-bit timers, up to 120 MHz, each with up to four IC/OC/PWM or pulse counter and quadrature (incremental) encoder input
Debug mode: Serial wire debug (SWD), JTAG, and Cortex?-M3 Embedded Trace Macrocell?
Printers, and scanners
Alarm systems, video intercom, and HVAC
Home audio appliances
Motor drive and application control
Medical equipment
Industrial applications: PLC, inverters, circuit breakers
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Factory Lead Time | 12 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 144-LQFP |
| Surface Mount | YES |
| Number of Pins | 144 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tray |
| Series | STM32F2 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 144 |
| Max Power Dissipation | 500mW |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 120MHz |
| Base Part Number | STM32F207 |
| Pin Count | 144 |
| Interface | CAN, Ethernet, I2C, I2S, IrDA, LIN, MMC, SPI, UART, USART, USB |
| Memory Size | 1MB |
| Oscillator Type | Internal |
| Number of I/O | 114 |
| RAM Size | 132K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M3 |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, LCD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 1MB 1M x 8 |
| Connectivity | CANbus, Ethernet, I2C, IrDA, LINbus, Memory Card, SPI, UART/USART, USB OTG |
| Bit Size | 32 |
| Data Converter | A/D 24x12b; D/A 2x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| Number of Timers/Counters | 14 |
| Core Architecture | ARM |
| Number of UART Channels | 2 |
| Number of ADC Channels | 24 |
| Number of PWM Channels | 4 |
| Number of I2C Channels | 3 |
| Number of Ethernet Channels | 1 |
| Height | 1.45mm |
| Length | 20.2mm |
| Width | 20.2mm |
| REACH SVHC | No SVHC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STM32F207ZGT7 Datasheet
+8613715157867