STMPE1601TBR Overview16 I/Os are programmed into it.25-TFBGA packaging contains the device.Case Tape & Reel (TR) is available.Voting within 1.65V~3.6V is provided.Surface Mount is the recommended mounting type.If the operating temperature ranges from -40°C~85°C to Y, the device will work.Performance is achieved by its output frequency at 400kHz.As a whole, it is terminated with 25s.25 is the total number of pins on the part.At 1.8V, the device provides voltage.To run 225, we use the peak reflow temperature of this part.There are a total of 1 ports on the device.Using the STMPE1601 family as a guide, you can find parts that are related.This device can also be used to establish Keypad Controller, POR, PWM.IC chip bits total 16.Power can be delivered at 1.8/3.3V.Devices with 25 pins are available.Surface Mount can be used to mount the part.PARALLEL IO PORT, GENERAL PURPOSE uPs/uCs/Peripheral ICs belong to this category.
STMPE1601TBR FeaturesSTMPE1601TBR ApplicationsThere are a lot of STMicroelectronics
STMPE1601TBR I/O Expanders applications.
Antialiasing/Reconstruction Filter
Single-Ended to Differential Conversion/Amplification
Low Voltage, Low Noise, Differential Signal Processing
Common Mode Voltage Translation
Portable Instrumentation
Multiprotocol RFID Readers: EPC-GEN2, ISD and IPX
IDEN, PHS, GSM Basestations
Repeaters, Radio Links, and Modems
Wireless Telemetry
JTRS
| Factory Lead Time | 12 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 25-TFBGA |
| Number of Pins | 25 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | Xpander Logic™ |
| JESD-609 Code | e3 |
| Feature | Keypad Controller, POR, PWM |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 25 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| HTS Code | 8542.39.00.01 |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | STMPE1601 |
| Pin Count | 25 |
| Output Type | Open Drain |
| Power Supplies | 1.8/3.3V |
| Interface | I2C |
| Number of I/O | 16 |
| Number of Ports | 1 |
| uPs/uCs/Peripheral ICs Type | PARALLEL IO PORT, GENERAL PURPOSE |
| Number of Bits | 16 |
| Clock Frequency | 400kHz |
| Interrupt Output | Yes |
| Current - Output Source/Sink | 4mA |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
STMPE1601TBR Datasheet
+8613715157867