TAS3108DCPRG4 OverviewThe book is also accompanied by a case, which only adds to the value of the book. As a mounting type, Surface Mount is recommended for it. A 38-TFSOP (0.173, 4.40mm Width) Exposed Pad case has been embedded with it. I have a device with 4 channels attached to it. In this part, you will find Audio Signal Processor functions that you may find useful. In addition to being used in Automotive Audio, Consumer Audio, the device can be used in Y as well. Votage is supplied within the specified time frame. 0°C~70°C TA is the range of temperature for this device. This chip has 38 terminations, which means it has 38 terminations on it. The TAS3108 family of parts can be found by searching for a part number that is similar to it. As far as the 38 pins on the chip are concerned, they are accessible. In order to mount it, Surface Mount is required. This electrical component illustrates the Automotive, AEC-Q100 series. When a 3.3V-voltage supply is applied, the chip conducts. The supply voltage of the device can be as high as 3.3V. There are a total of 48 bits on each IC chip. As a whole, this device has the ability to host DIGITAL SIGNAL PROCESSOR, OTHER uP/uC / peripheral IC types. It has the potential to perform well at a frequency of 135MHz and can perform well.
TAS3108DCPRG4 FeaturesWith 38-TFSOP (0.173, 4.40mm Width) Exposed Pad channels
operate temperature at the range of 0°C~70°C TA
Supply voltage at 3.3V volts
with 48 bits
TAS3108DCPRG4 ApplicationsThere are a lot of Texas Instruments
TAS3108DCPRG4 Audio Special Purpose applications.
Replacement of DIR1703
Other Applications Requiring S/PDIF Receiver
Audio Differential Line Drivers
Audio Mix Consoles
Distribution Amplifiers
Graphic and P arametric Equalizers
Dynamic Range Processors
Digital Effects Processors
Telecom Systems
Hi-Fi Equipment
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 38-TFSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 38 |
| Weight | 130.010913mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 38 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Automotive Audio, Consumer Audio |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 135MHz |
| Base Part Number | TAS3108 |
| Function | Audio Signal Processor |
| Operating Supply Voltage | 3.3V |
| Number of Channels | 4 |
| Interface | I2C |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, OTHER |
| Number of Bits | 48 |
| Data Bus Width | 32b |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Format | FIXED POINT |
| Barrel Shifter | NO |
| Internal Bus Architecture | MULTIPLE |
| Length | 9.7mm |
| Height Seated (Max) | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |