TAS5028PAG OverviewMoreover, the book has an appendix that contains a case study. There is only one mounting type recommended for the product, which is Surface Mount. There is a 64-TQFP case embedded in it. In this case, the device has 8 channels. There are Modulator functions included in this part for your reference. This device can be applied in both Digital Audio Interfacing and X directions. As far as I know, it is supplied within 3V~3.6V days. In this device, the temperature range is 0°C~70°C TA, which is the range of this device. There are 64 terminations on the chip, which is the number of terminations on the chip. You can find similar parts by searching for the TAS5028 family of parts. The following specifications are related to the device: 32kHz ~ 192kHz, which can be found here. The chip has 64 pins that are accessible from the outside. In order to sort a part based on its consumer IC type, CONSUMER CIRCUIT can be used. It represents the PurePath Digital™ series. 3.6V-voltage supplies conduct current through the chip. With a supply current of 20mA, it is able to operate. There is no doubt that when it is operating at a frequency of 48kHz, it will be of good performance.
TAS5028PAG FeaturesWith 64-TQFP channels
operate temperature at the range of 0°C~70°C TA
consumer IC type: CONSUMER CIRCUIT
operate supply current at 20mA
TAS5028PAG ApplicationsThere are a lot of Texas Instruments
TAS5028PAG Audio Special Purpose applications.
High-End Audio/Sound Card for PC
Replacement of DIR1703
Other Applications Requiring S/PDIF Receiver
Audio Differential Line Drivers
Audio Mix Consoles
Distribution Amplifiers
Graphic and P arametric Equalizers
Dynamic Range Processors
Digital Effects Processors
Telecom Systems
| Factory Lead Time | 6 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Surface Mount | YES |
| Number of Pins | 64 |
| Weight | 270.000858mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | PurePath Digital™ |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Digital Audio Interfacing |
| Max Power Dissipation | 818mW |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Frequency | 48kHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TAS5028 |
| Function | Modulator |
| Qualification Status | Not Qualified |
| Output Type | PWM |
| Operating Supply Voltage | 3.6V |
| Number of Channels | 8 |
| Interface | I2C, I2S |
| Operating Supply Current | 20mA |
| Output Power | 1.869W |
| Resolution | 4 B |
| Specifications | 32kHz ~ 192kHz |
| Consumer IC Type | CONSUMER CIRCUIT |
| Signal to Noise Ratio (SNR) | 102 dB |
| Max Supply Voltage (DC) | 3.6V |
| Min Supply Voltage (DC) | 3V |
| Length | 10mm |
| Height Seated (Max) | 1.2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mfr | Texas Instruments |
| Series | Tray |
| Product Status | Modulator |
| Function | Digital Audio Interfacing |
| Applications | 8 |
| Number of Channels | I²C, I²S |
| Interface | 3V ~ 3.6V |
| Voltage - Supply | 0°C ~ 70°C (TA) |
| Operating Temperature | 32kHz ~ 192kHz |
| Specifications | Surface Mount |
| Mounting Type | 64-TQFP |
| Package / Case | 64-TQFP (10x10) |
| Supplier Device Package | |
TAS5028PAG Datasheet
+8613715157867