TE0630-01I Overview
FPGA, USB Core is the type of module or board that is used in this microcontroller.Microprocessor chip is powered by a processor with a total of Spartan-6 LX-45 cores in it.It is default for the microcontroller to set the mode to -40°C~85°C.There is a flash size 8MB on the MCU electronics.In this case, the connector type is B2B.There are two versions of this microcontrollers in the TE0630 Series.This is done to make sure that the software is able to run normally and that the RAM size is reduced to 128MB.In this MCU chip, the speed is set to 100MHz.An Intel Cypress EZ-USB FX2LP Core Processor is at the heart of this MCUs.
TE0630-01I Features
Core processor of Spartan-6 LX-45
Flash size of 8MB
Speed of 100MHz

TE0630-01I Applications
There are a lot of Trenz Electronic GmbH
TE0630-01I Microcontroller, Microprocessor, FPGA Modules applications.

Industrial Control
Process Control
Process Monitoring
Healthcare Monitoring
Patient Monitoring
IoT Secure Gateways
Human Machine Interface
Human Machine Control Panel
Home and Building Automation
Thermostat

Factory Lead Time	12 Weeks
Operating Temperature	-40°C~85°C
Series	TE0630
Published	2013
Size / Dimension	1.6 x 1.9 40.5mmx47.5mm
Part Status	Discontinued
Connector Type	B2B
Speed	100MHz
RAM Size	128MB
Core Processor	Spartan-6 LX-45
Module/Board Type	FPGA, USB Core
Flash Size	8MB
Co-Processor	Cypress EZ-USB FX2LP
RoHS Status	ROHS3 Compliant