TE0715-04-30-1I Overview
The microcontroller has been classified as a MCU, FPGA type module or board.An integral MCU electronics of it is a processor with ARM Cortex-A9 cores that drives the whole thing.It is important to note that the microcontroller is set to -40°C~85°C as the default setting.A MCU electronics's flash size is measured by the letter 32MB.Connectors of type Samtec LSHM are the most common.A member of the TE0715 Series, this MCUs can be found in this category.A RAM size of 1GB is set in order to ensure that the software runs normally and that MCU chip does not crash.There is a 125MHz speed for this MCU chip.Powering Microprocessor chip is a Zynq-7000 (Z-7030) Core Processor.
TE0715-04-30-1I Features
Core processor of ARM Cortex-A9
Flash size of 32MB
Speed of 125MHz

TE0715-04-30-1I Applications
There are a lot of Trenz Electronic GmbH
TE0715-04-30-1I Microcontroller, Microprocessor, FPGA Modules applications.

Process Monitoring
Healthcare Monitoring
Patient Monitoring
IoT Secure Gateways
Human Machine Interface
Human Machine Control Panel
Home and Building Automation
Thermostat
Industrial Gateways
Embedded Instrumentation

Factory Lead Time	12 Weeks
Operating Temperature	-40°C~85°C
Series	TE0715
Published	2016
Size / Dimension	1.97 x 1.57 50mmx40mm
Part Status	Active
Moisture Sensitivity Level (MSL)	Not Applicable
Connector Type	Samtec LSHM
Speed	125MHz
RAM Size	1GB
Core Processor	ARM Cortex-A9
Module/Board Type	MCU, FPGA
Flash Size	32MB
Co-Processor	Zynq-7000 (Z-7030)
RoHS Status	ROHS3 Compliant