TE0715-04-30-1I3 Overview
This microcontroller has a module or board type of MCU, FPGA, which indicates that it is a module.There are ARM Cortex-A9 cores in its processor, which is what powers the microcontroller.It is not surprising that -40°C~85°C is the microcontroller's default setting.This MCU electronics has a size of 32MB in terms of its flash.There are two types of connectors. The first is Samtec LSHM.I would say that MCU chip belongs to the TE0715 Series.As a result, the RAM size of the software has been reduced to 1GB in order to ensure that MCU chip runs normally.MCU chips of the MCU chip are operated at a 125MHz speed.In order to make it work, it is powered by a Zynq-7000 (Z-7030) Core Processor.
TE0715-04-30-1I3 Features
Core processor of ARM Cortex-A9
Flash size of 32MB
Speed of 125MHz

TE0715-04-30-1I3 Applications
There are a lot of Trenz Electronic GmbH
TE0715-04-30-1I3 Microcontroller, Microprocessor, FPGA Modules applications.

Process Control
Process Monitoring
Healthcare Monitoring
Patient Monitoring
IoT Secure Gateways
Human Machine Interface
Human Machine Control Panel
Home and Building Automation
Thermostat
Industrial Gateways

Factory Lead Time	12 Weeks
Operating Temperature	-40°C~85°C
Series	TE0715
Published	2010
Size / Dimension	1.97 x 1.57 50mmx40mm
Part Status	Active
Moisture Sensitivity Level (MSL)	Not Applicable
Connector Type	Samtec LSHM
Speed	125MHz
RAM Size	1GB
Core Processor	ARM Cortex-A9
Module/Board Type	MCU, FPGA
Flash Size	32MB
Co-Processor	Zynq-7000 (Z-7030)
RoHS Status	ROHS3 Compliant