THS4031IDGN OverviewIn order to protect the op amps, a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad case is used. There are two types of operational amplifiers in this circuit. In the case of Tube cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 8. It consists of a total of 8 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. It has 8 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 2mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 8.5mA and 10 . Maintain 95dB as the voltage gain. Buffer op amp is equipped with 1 channels on the device.
THS4031IDGN Features8 Pins
supply voltage of 15V
95dB voltage gain
THS4031IDGN ApplicationsThere are a lot of Texas Instruments
THS4031IDGN Instrumentational OP Amps applications.
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Factory Lead Time | 6 Weeks |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 24.408939mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Max Power Dissipation | 1.8W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | THS4031 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Operating Supply Current | 8.5mA |
| Nominal Supply Current | 10mA |
| Power Dissipation | 1.8W |
| Output Current | 90mA |
| Max Supply Current | 9mA |
| Slew Rate | 100V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 3μA |
| Voltage - Supply, Single/Dual (±) | 9V~32V ±4.5V~16V |
| Output Current per Channel | 90mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 100MHz |
| Gain Bandwidth Product | 120MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 200000 kHz |
| Voltage Gain | 95dB |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 500μV |
| Settling Time | 60 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 90MHz |
| Bias Current-Max (IIB) @25C | 6μA |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Max I/O Voltage | 2mV |
| Input Offset Current-Max (IIO) | 0.25μA |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
+8613715157867