TL16C2752IFNR OverviewAlternatively, UART can be purchased in the cost-effective 44-LCC (J-Lead) package.Transmission is carried out over 2, DUART channels.Tape & Reel (TR) is adopted as the packaging option.Its uPs/uCs/Peripheral ICs use SERIAL IO/COMMUNICATION CONTROLLER, SERIAL.The configuration uses 44 terminations.During operation, it receives a voltage of 5V.The status of this electronic part is currently Obsolete.As a means of communicating data, there are 2 serial I/Os available.Surface Mount is the method for mounting it.In order for it to operate, a voltage of 1.8V~5V must be applied.This device is an integrated circuit with 44 pins.Its clock frequency is measured at 48MHz.In order for the equipment to work for a long period of time, it should not be allowed to reach a temperature above -40°C.UART is recommended that the operating temperature does not exceed 85°C to ensure long-term, normal performance.A configuration of the chip is determined by its 44 pins.The object possesses some characteristics that are similar to Internal Oscillator.A mounting method of Surface Mount is used.To ensure its high efficiency, a voltage of 5V is provided as the supply voltage.In addition, it has the capability of performing ALSO OPERATES AT 1.8V/2.5V/3.3V SUPPLY.The base part number of the part is set to 16C2752.
TL16C2752IFNR Features2 serial I/Os
Clock frequency of 48MHz
Operating supply voltage of 5V
ALSO OPERATES AT 1.8V/2.5V/3.3V SUPPLY
TL16C2752IFNR ApplicationsThere are a lot of Texas Instruments
TL16C2752IFNR UARTs applications.
White goods
Battery Operated Electronics
Handheld Terminal
Personal Digital Assistants
Cellular Phones DataPort
Wireless Infrared Data Communications Systems
Handheld Terminals and Tablets
Handheld Computers
Wireless Portable Point-of-Sale Terminals
GPS Devices
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Number of Pins | 44 |
| Weight | 2.265694g |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Internal Oscillator |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ALSO OPERATES AT 1.8V/2.5V/3.3V SUPPLY |
| HTS Code | 8542.31.00.01 |
| Voltage - Supply | 1.8V~5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | 16C2752 |
| Pin Count | 44 |
| Operating Supply Voltage | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2, DUART |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 48MHz |
| Address Bus Width | 3 |
| Protocol | RS485 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| External Data Bus Width | 8 |
| Data Rate (Max) | 3Mbps |
| Number of Serial I/Os | 2 |
| Data Transfer Rate-Max | 0.375 MBps |
| FIFO's | 64 Byte |
| With False Start Bit Detection | Yes |
| Length | 16.585mm |
| Height Seated (Max) | 4.57mm |
| Width | 16.585mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL16C2752IFNR Datasheet
+8613715157867