TL16C552AIFNG4 OverviewThere is a cost-effective 68-LCC (J-Lead) package available for this product.The transmission of data takes place over 2, DUART channels.For packaging purposes, Tube is used.The type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used to identify the uPs/uCs/Peripheral ICs on the board.Configuration of this device involves 68 terminations.For its operation, it requires a supply voltage of 5V.At present, this electronic part has a status of Obsolete.Data is communicated via 2 serial I/Os.Mounting it through Surface Mount is possible.During operation, the supply voltage is set to 4.75V~5.25V.Electronic devices such as this are known as 68-pin integrated circuits.There is 16MHz clock frequency measured on this IC.UART is recommended that the operating temperature does not exceed -40°C to ensure long-term, normal performance.Ideally, the operating temperature should not exceed 85°C in order to ensure long-term performance.The configuration of this device is based on the 68 pins.There are some characteristics of Printer Port that it possesses.The mount is done using Surface Mount.When power supplies are provided of 5V, it is reliable and efficient for electronic designers.In order for the device to operate efficiently, 5V is the supply voltage.Basically, it uses TL16C552 as its base part number.50mA is the maximum value of the supply current.
TL16C552AIFNG4 Features2 serial I/Os
Clock frequency of 16MHz
Power supplies of 5V
Operating supply voltage of 5V
TL16C552AIFNG4 ApplicationsThere are a lot of Texas Instruments
TL16C552AIFNG4 UARTs applications.
Battery Operated Electronics
Handheld Terminal
Personal Digital Assistants
Cellular Phones DataPort
Wireless Infrared Data Communications Systems
Handheld Terminals and Tablets
Handheld Computers
Wireless Portable Point-of-Sale Terminals
GPS Devices
Personal Digital Assistants Modules
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 68-LCC (J-Lead) |
| Number of Pins | 68 |
| Weight | 4.869796g |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Printer Port |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 68 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.31.00.01 |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TL16C552 |
| Pin Count | 68 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2, DUART |
| Nominal Supply Current | 50mA |
| Max Supply Current | 50mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 16MHz |
| Address Bus Width | 3 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| External Data Bus Width | 8 |
| Data Rate (Max) | 1Mbps |
| Number of Serial I/Os | 2 |
| Bus Compatibility | IBM PC-AT |
| Data Transfer Rate-Max | 0.125 MBps |
| Communication Protocol | ASYNC, BIT |
| FIFO's | 16 Byte |
| With False Start Bit Detection | Yes |
| Length | 24.23mm |
| Height Seated (Max) | 4.57mm |
| Width | 24.23mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
+8613715157867