TL16C552APNG4 Overview
This product is available in a cost-effective package called LQFP.The transmission is conducted over 2 channels.The type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used for the uPs, uCs, and peripheral ICs on the board.The configuration of this device includes 80 terminations.For its operation, a voltage of 5V is provided as the supply voltage.There are 2 serial I/Os available for communication of data.The electronic device is a type of integrated circuit with a pin count of 80.There is a 16MHz clock frequency for this IC.In order to ensure the normal functioning of the system for long periods of time, the operating temperature should not exceed -40°C.The configuration relies on the 80 pins.Surface Mount is the method used to mount it.Keeping the supply voltage below 5.25V can ensure that reliability will be preserved in the system.When the voltage of the supply exceeds 4.75V, the system will be more reliable.If the power supply is set to 5V, it is reliable and efficient for electronic designers.UART operates at 5V voltage to maintain high efficiency.Further to this, it has also been demonstrated to be able to perform ENHANCED BIDIRECTIONAL PRINTER PORT.Universal asynchronous receiver-transmitter is allowed to have a maximum supply current of 50mA.
TL16C552APNG4 Features
2 serial I/Os
Clock frequency of 16MHz
Power supplies of 5V
Operating supply voltage of 5V
ENHANCED BIDIRECTIONAL PRINTER PORT

TL16C552APNG4 Applications
There are a lot of Texas Instruments
TL16C552APNG4 UARTs applications.

Personal Digital Assistants
Cellular Phones DataPort
Wireless Infrared Data Communications Systems
Handheld Terminals and Tablets
Handheld Computers
Wireless Portable Point-of-Sale Terminals
GPS Devices
Personal Digital Assistants Modules
Battery Operated Instruments
Multimedia Systems

Mount	Surface Mount
Package / Case	LQFP
Number of Pins	80
Weight	465.697616mg
JESD-609 Code	e4
Pbfree Code	yes
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	80
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Min Operating Temperature	-40°C
Additional Feature	ENHANCED BIDIRECTIONAL PRINTER PORT
Terminal Position	QUAD
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Supply Voltage	5V
Terminal Pitch	0.5mm
Pin Count	80
Operating Supply Voltage	5V
Power Supplies	5V
Temperature Grade	COMMERCIAL
Number of Channels	2
Max Supply Voltage	5.25V
Min Supply Voltage	4.75V
Nominal Supply Current	50mA
Max Supply Current	50mA
uPs/uCs/Peripheral ICs Type	SERIAL IO/COMMUNICATION CONTROLLER, SERIAL
Clock Frequency	16MHz
Data Rate	1 Mbps
Address Bus Width	3
Boundary Scan	NO
Low Power Mode	NO
External Data Bus Width	8
Number of Serial I/Os	2
Bus Compatibility	IBM PC-AT
Communication Protocol	ASYNC, BIT
Height Seated (Max)	1.6mm
Radiation Hardening	No
RoHS Status	RoHS Compliant
Lead Free	Contains Lead