TL16C754BPN OverviewThis product is available in a cost-effective package called 80-LQFP.The transmission is conducted over 4, QUART channels.Tray is used in terms of packaging.The type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used for the uPs, uCs, and peripheral ICs on the board.The configuration of this device includes 80 terminations.For its operation, a voltage of 5V is provided as the supply voltage.As of right now, this electronic part is in a Active status.There are 4 serial I/Os available for communication of data.A method of mounting it is through Surface Mount.There is a voltage supply of 0 volts for the device.The electronic device is a type of integrated circuit with a pin count of 80.In order to ensure the normal functioning of the system for long periods of time, the operating temperature should not exceed -40°C.For a long-term satisfactory performance, it is necessary not to exceed the operating temperature of 85°C.The configuration relies on the 80 pins.Surface Mount is the method used to mount it.If the power supply is set to 3.3/5V, it is reliable and efficient for electronic designers.UART operates at 5.5V voltage to maintain high efficiency.Further to this, it has also been demonstrated to be able to perform ALSO OPERATES AT 3.3V SUPPLY.TL16C754 is set as the base part number for the part.A supply current of 50mA is appropriate for specific applications.There is a lot of information stored in the memory with the size 64B.
TL16C754BPN Features4 serial I/Os
Power supplies of 3.3/5V
Operating supply voltage of 5.5V
ALSO OPERATES AT 3.3V SUPPLY
TL16C754BPN ApplicationsThere are a lot of Texas Instruments
TL16C754BPN UARTs applications.
Personal Digital Assistants
Cellular Phones DataPort
Wireless Infrared Data Communications Systems
Handheld Terminals and Tablets
Handheld Computers
Wireless Portable Point-of-Sale Terminals
GPS Devices
Personal Digital Assistants Modules
Battery Operated Instruments
Multimedia Systems
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 80-LQFP |
| Number of Pins | 80 |
| Weight | 465.697616mg |
| Packaging | Tray |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ALSO OPERATES AT 3.3V SUPPLY |
| HTS Code | 8542.39.00.01 |
| Voltage - Supply | 2.7V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 50MHz |
| Base Part Number | TL16C754 |
| Pin Count | 80 |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 3.3/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 4, QUART |
| Memory Size | 64B |
| Operating Supply Current | 50mA |
| Nominal Supply Current | 25mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Data Rate (Max) | 3Mbps |
| Number of Serial I/Os | 4 |
| Data Transfer Rate-Max | 0.375 MBps |
| Communication Protocol | ASYNC, BIT |
| Data Encoding/Decoding Method | NRZ |
| FIFO's | 64 Byte |
| With Modem Control | Yes |
| Height | 1.6mm |
| Length | 12mm |
| Width | 12mm |
| Thickness | 1.4mm |
| REACH SVHC | No SVHC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
+8613715157867