TLC320AD77CDBR Overview
In order to save space, it is packaged in the 28-SSOP (0.209, 5.30mm Width) package. Tape & Reel (TR) packaging method is used. Due to the fact that this part is of the type Stereo Audio, it is capable of delivering high-efficiency performance in a wide range of applications. As a mounting type, it uses Surface Mount. When the operating performance is set to 0°C~70°C, it is able to operate normally. It features 1 / 1 ADCs / DACs. In the analog circuit, the supply voltage is 3V~3.6V. Supply voltage is set to 3V~3.6V for the digital circuit. 28 terminations prevent signals from reflecting off transmission lines. There are 28 pins on this device. 28 pins are connected to it. More related parts can be found using its base part number TLC320. Ideally, the supply voltage should remain at 3.6V. 3V should be the minimum value of supply voltage. Operating voltage of 3.3V is possible. Digital signals are converted into analog signals with 2 D/A converters.
TLC320AD77CDBR Features
Embedded in the 28-SSOP (0.209, 5.30mm Width) package
Operating temperature of 0°C~70°C
1 / 1 ADCs / DACs

TLC320AD77CDBR Applications
There are a lot of Texas Instruments
TLC320AD77CDBR CODECs Interface ICs applications.

Conveying
Cut-to-length
Filling
Food & beverage
Linear measurement
Material handling
Metal forming & fabrication
Mobile equipement
Motor feedback
Packaging

Mounting Type	Surface Mount
Package / Case	28-SSOP (0.209, 5.30mm Width)
Surface Mount	YES
Number of Pins	28
Weight	208.397344mg
Operating Temperature	0°C~70°C
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	28
Type	Stereo Audio
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Terminal Pitch	0.65mm
Base Part Number	TLC320
Pin Count	28
Operating Supply Voltage	3.3V
Max Supply Voltage	3.6V
Min Supply Voltage	3V
Data Interface	Serial
Sampling Rate	96 ksps
Voltage - Supply, Analog	3V~3.6V
Voltage - Supply, Digital	3V~3.6V
Power Consumption	160mW
Signal to Noise Ratio (SNR)	100 dB
Number of D/A Converters	2
Resolution (Bits)	24 b
Sigma Delta	Yes
Number of ADCs / DACs	1 / 1
Dynamic Range, ADCs / DACs (db) Typ	100 / 100
S/N Ratio, ADCs / DACs (db) Typ	100 / 100
Width	5.3mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free