TLE2024IDW OverviewPackaged in a 16-SOIC (0.295, 7.50mm Width) case, the buffer op amp is ready to use. An op amp ic of the General Purpose type. The op amp is delivered to you in a Tube case. There is a growing number of terminations approaching the number of 16. The pins on this board total to 16 in total. I would like to remind you that this buffer op amp should be powered by an 15V battery. A total of 16 pins are present on the instrumentation amplifier. There is an input offset voltage of 1.1mV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . As long as the supply current of the chip does not exceed 1.05mA, this op amp ic can operate. 123.52dB should remain the voltage gain. As far as the device is concerned, buffer amplifier has 4 channels. The operating supply voltage of the buffer op amp is rated at 20V. As the name implies, Excalibur™ refers to the series of the buffer op amp.
TLE2024IDW Features16 Pins
supply voltage of 15V
123.52dB voltage gain
TLE2024IDW ApplicationsThere are a lot of Texas Instruments
TLE2024IDW Instrumentational OP Amps applications.
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Factory Lead Time | 8 Weeks |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | Excalibur™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Max Power Dissipation | 1.025W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TLE2024 |
| Pin Count | 16 |
| Operating Supply Voltage | 20V |
| Number of Channels | 4 |
| Operating Supply Current | 1.05mA |
| Nominal Supply Current | 1.4mA |
| Power Dissipation | 1.025W |
| Slew Rate | 0.7V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 50nA |
| Voltage - Supply, Single/Dual (±) | 4V~40V ±2V~20V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 1.1mV |
| Bandwidth | 1.2MHz |
| Gain Bandwidth Product | 2.8MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 2000 kHz |
| Voltage Gain | 123.52dB |
| Average Bias Current-Max (IIB) | 0.09μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1mV |
| Low-Bias | NO |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.07μA |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Input Offset Current-Max (IIO) | 0.006μA |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| REACH SVHC | No SVHC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLE2024IDW Datasheet
+8613715157867