TLV2432AIDR OverviewThere is a 8-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the General Purpose-type. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. We are approaching the 8h termination of the year. In total, there are 8 pins on this op amp ic. This linear amplifier should be powered by an 3V battery. 8 pins are located on the operational amplifiers. The input offset voltage is 950μV. This electrical part should be mounted using type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . The buffer amplifier is capable of operating from a supply current of 100μA . It is recommended to keep the voltage gain at 119.55dB at all times. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. The total number of elements in this buffer amplifier is 2. The operating supply voltage of the buffer op amp is rated at 5V. This linear amplifier pack is based on the TR axis. Instrumentation amplifiers are numbered by their LinCMOS™ series.
TLV2432AIDR Features8 Pins
supply voltage of 3V
119.55dB voltage gain
Output Type: Rail-to-Rail
TLV2432AIDR ApplicationsThere are a lot of Texas Instruments
TLV2432AIDR Instrumentational OP Amps applications.
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering
Signal operation
Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
Factory Lead Time | 6 Weeks |
Mount | Surface Mount |
Mounting Type | Surface Mount |
Package / Case | 8-SOIC (0.154, 3.90mm Width) |
Number of Pins | 8 |
Operating Temperature | -40°C~85°C |
Packaging | Tape & Reel (TR) |
Series | LinCMOS™ |
JESD-609 Code | e4 |
Pbfree Code | yes |
Part Status | Active |
Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
Number of Terminations | 8 |
ECCN Code | EAR99 |
Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
Packing Method | TR |
Terminal Position | DUAL |
Terminal Form | GULL WING |
Peak Reflow Temperature (Cel) | 260 |
Number of Functions | 2 |
Supply Voltage | 3V |
Base Part Number | TLV2432 |
Pin Count | 8 |
Output Type | Rail-to-Rail |
Operating Supply Voltage | 5V |
Number of Elements | 2 |
Operating Supply Current | 100μA |
Nominal Supply Current | 250μA |
Power Dissipation | 725mW |
Output Current | 50mA |
Slew Rate | 0.25V/μs |
Architecture | VOLTAGE-FEEDBACK |
Amplifier Type | General Purpose |
Common Mode Rejection Ratio | 70 dB |
Current - Input Bias | 1pA |
Voltage - Supply, Single/Dual (±) | 2.7V~10V ±1.35V~5V |
Output Current per Channel | 50mA |
Input Offset Voltage (Vos) | 950μV |
Bandwidth | 500 kHz |
Gain Bandwidth Product | 550kHz |
Unity Gain BW-Nom | 500 kHz |
Voltage Gain | 119.55dB |
Average Bias Current-Max (IIB) | 0.00006μA |
Low-Offset | NO |
Frequency Compensation | YES |
Voltage - Input Offset | 300μV |
Low-Bias | YES |
Micropower | YES |
Bias Current-Max (IIB) @25C | 0.00006μA |
Programmable Power | NO |
Dual Supply Voltage | 3V |
Input Offset Current-Max (IIO) | 0.00006μA |
Height | 1.75mm |
Length | 4.9mm |
Width | 3.91mm |
Thickness | 1.58mm |
Radiation Hardening | No |
RoHS Status | ROHS3 Compliant |
Lead Free | Lead Free |