TLV272CDR OverviewIt is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. An op amp of this type is a CMOS-type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 5mV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of 0°C~70°C. A supply current of 625μA can be used to operate this linear amplifier. There should be no change in the voltage gain at 110dB. This op amp ic has 2 circuits. There are a total of 2 channels available on the op amps. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. This instrumentation amplifier cannot operate below -40°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 125°C. There are 2 elements in this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 5V. For optimal performance, this electrical part should be connected to a supply with a current of 625μA. It is important to keep in mind that the power supply voltage of this electric component is below 16V, which is suitable. Keeping the linear amplifier's supply voltage above 2.7V is recommended. In order to conduct this part, you will need to provide dual supply voltages of 8V volts. The linear amplifier has 2 amplifiers.
TLV272CDR Features110dB voltage gain
Output Type: Rail-to-Rail
TLV272CDR ApplicationsThere are a lot of Texas Instruments
TLV272CDR Instrumentational OP Amps applications.
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Factory Lead Time | 12 Weeks |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SOIC |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 396mW |
| Base Part Number | TLV272 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 625μA |
| Nominal Supply Current | 1.6mA |
| Power Dissipation | 396mW |
| Output Current | 13mA |
| Current - Supply | 625μA |
| Slew Rate | 2.6V/μs |
| Amplifier Type | CMOS |
| Common Mode Rejection Ratio | 58 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±1.35V~8V |
| Output Current per Channel | 13mA |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 3MHz |
| Gain Bandwidth Product | 3MHz |
| Voltage Gain | 110dB |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Voltage - Input Offset | 500μV |
| Current - Output / Channel | 8mA |
| Max Dual Supply Voltage | 8V |
| Min Dual Supply Voltage | 1.35V |
| Dual Supply Voltage | 5V |
| Nominal Gain Bandwidth Product | 2.4MHz |
| Max I/O Voltage | 5mV |
| Number of Amplifiers | 2 |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
+8613715157867