TLV32014KIDBTRG4 OverviewDue to space constraints, it is supplied in the TSSOP package. In order to prevent signal reflections from off the end of the transmission line, 30 terminations are used. Essentially, it is an electronic device with 30 pins. There are 30 pins on this board. 3.6V is the maximum value of supply voltage. Minimum supply voltage should remain at 1.1V. There is 1.8V supply voltage for this device. Often in the process of converting digital signals into analog signals, there are 1 D/A converters. 85°C is set as the maximum operating temperature to keep the system working normally. Normal operation is maintained by setting the operating temperature low at -40°C. For data transmission, the device has 2 channels. A characteristic of it is that it has IT ALSO REQUIRES 3.3V ANALOG SUPPLY. There should be no more than 2V analog input voltage.
TLV32014KIDBTRG4 FeaturesEmbedded in the TSSOP package
IT ALSO REQUIRES 3.3V ANALOG SUPPLY
TLV32014KIDBTRG4 ApplicationsThere are a lot of Texas Instruments
TLV32014KIDBTRG4 CODECs Interface ICs applications.
Filling
Food & beverage
Linear measurement
Material handling
Metal forming & fabrication
Mobile equipement
Motor feedback
Packaging
Printing
Registration mark timing
| Package / Case | TSSOP |
| Surface Mount | YES |
| Number of Pins | 30 |
| Weight | 97.49401mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 30 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | IT ALSO REQUIRES 3.3V ANALOG SUPPLY |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Output | VOLTAGE |
| Pin Count | 30 |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Interface | 2-Wire, I2C, Serial |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.1V |
| Input Type | SINGLE-ENDED/DIFF |
| Resolution | 2 B |
| Sampling Rate | 104 ksps |
| Power Consumption | 11.2mW |
| Telecom IC Type | PROGRAMMABLE CODEC |
| Output Voltage-Max | 2.35V |
| Analog Input Voltage-Max | 2V |
| Signal to Noise Ratio (SNR) | 84 dB |
| Number of D/A Converters | 1 |
| Filter | YES |
| Output Code | TWOS COMPLEMENT |
| Input Code | TWOS COMPLEMENT |
| Length | 7.8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
+8613715157867