TLV320AIC10IGQER OverviewIn order to save space, it is packaged in the 80-VFBGA package. Cut Tape (CT) packaging method is used. Due to the fact that this part is of the type General Purpose, it is capable of delivering high-efficiency performance in a wide range of applications. As a mounting type, it uses Surface Mount. When the operating performance is set to -40°C~85°C, it is able to operate normally. It features 1 / 1 ADCs / DACs. In the analog circuit, the supply voltage is 3V~5.5V. Supply voltage is set to 3V~5.5V for the digital circuit. 80 terminations prevent signals from reflecting off transmission lines. There are 80 pins on this device. 80 pins are connected to it. More related parts can be found using its base part number TLV320AIC10. Ideally, the supply voltage should remain at 5.5V. 3V should be the minimum value of supply voltage. Operating voltage of 3.6V is possible. Digital signals are converted into analog signals with 1 D/A converters. The storage of information is provided by 16 bits.
TLV320AIC10IGQER FeaturesEmbedded in the 80-VFBGA package
Operating temperature of -40°C~85°C
1 / 1 ADCs / DACs
TLV320AIC10IGQER ApplicationsThere are a lot of Texas Instruments
TLV320AIC10IGQER CODECs Interface ICs applications.
Conveying
Cut-to-length
Filling
Food & beverage
Linear measurement
Material handling
Metal forming & fabrication
Mobile equipement
Motor feedback
Packaging
| Mounting Type | Surface Mount |
| Package / Case | 80-VFBGA |
| Surface Mount | YES |
| Number of Pins | 80 |
| Weight | 45.812829mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 80 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TLV320AIC10 |
| Pin Count | 80 |
| Operating Supply Voltage | 3.6V |
| Interface | SPI, Serial |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Number of Bits | 16 |
| Data Interface | Serial |
| Sampling Rate | 22 ksps |
| Voltage - Supply, Analog | 3V~5.5V |
| Voltage - Supply, Digital | 3V~5.5V |
| Power Consumption | 39mW |
| Signal to Noise Ratio (SNR) | 87 dB |
| Number of D/A Converters | 1 |
| Resolution (Bits) | 16 b |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 1 / 1 |
| Dynamic Range, ADCs / DACs (db) Typ | 82 / 82 |
| S/N Ratio, ADCs / DACs (db) Typ | 87 / 90 |
| Length | 5mm |
| Width | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
+8613715157867