TLV320AIC14CDBTG4 OverviewSpace-saving is achieved by supplying it in the TSSOP package. To prevent signals from reflecting off of the transmission line, there are 30 terminations. The device has 30 pins. The pins are configured as 30. Surface Mount technology is used for mounting it to a PCB. It is recommended to maintain the maximum supply voltage at 3.6V. Converting analog signals to digital signals requires 1 A/D converters. Supply voltage should be maintained at 1.1V. Voltage 1.8V is used for its power supply. Keeping the operating temperature at 70°C maintains normal use. In order to keep normal operation, the operating temperature is set as a minimum value of 0°C. Data transmission is handled by 2 channels. There is a property of this type known as IT ALSO REQUIRES 3.3V ANALOG SUPPLY. Analog input voltages should not exceed 2V.
TLV320AIC14CDBTG4 FeaturesEmbedded in the TSSOP package
1 A/D converters
IT ALSO REQUIRES 3.3V ANALOG SUPPLY
TLV320AIC14CDBTG4 ApplicationsThere are a lot of Texas Instruments
TLV320AIC14CDBTG4 CODECs Interface ICs applications.
Ball screw positioning
Converting
Conveying
Cut-to-length
Filling
Food & beverage
Linear measurement
Material handling
Metal forming & fabrication
Mobile equipement
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 30 |
| Weight | 97.49401mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 30 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | IT ALSO REQUIRES 3.3V ANALOG SUPPLY |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Output | VOLTAGE |
| Pin Count | 30 |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 2 |
| Interface | 2-Wire, I2C, Serial |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.1V |
| Input Type | SINGLE-ENDED/DIFF |
| Resolution | 2 B |
| Sampling Rate | 104 ksps |
| Number of A/D Converters | 1 |
| Telecom IC Type | PROGRAMMABLE CODEC |
| Output Voltage-Max | 2.35V |
| Analog Input Voltage-Max | 2V |
| Signal to Noise Ratio (SNR) | 84 dB |
| Filter | YES |
| Output Code | TWOS COMPLEMENT |
| Input Code | TWOS COMPLEMENT |
| Length | 7.8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |