TLV320AIC33IGQE Overview
In order to save space, it is packaged in the 80-VFBGA package. Tray packaging method is used. Due to the fact that this part is of the type Stereo Audio, it is capable of delivering high-efficiency performance in a wide range of applications. As a mounting type, it uses Surface Mount. When the operating performance is set to -40°C~85°C, it is able to operate normally. It features 2 / 2 ADCs / DACs. In the analog circuit, the supply voltage is 2.7V~3.6V. Supply voltage is set to 1.65V~1.95V for the digital circuit. 80 terminations prevent signals from reflecting off transmission lines. There are 80 pins on this device. 80 pins are connected to it. More related parts can be found using its base part number TLV320AIC33. Ideally, the supply voltage should remain at 3.6V. 1.1V should be the minimum value of supply voltage. This device runs on 1.83.3V power supplies. Digital signals are converted into analog signals with 2 D/A converters. The storage of information is provided by 24 bits. The device is equipped with 10 analog inputs. A total of 7 analog outputs are included.
TLV320AIC33IGQE Features
Embedded in the 80-VFBGA package
Operating temperature of -40°C~85°C
2 / 2 ADCs / DACs
10 analog inputs
7 analog outputs

TLV320AIC33IGQE Applications
There are a lot of Texas Instruments
TLV320AIC33IGQE CODECs Interface ICs applications.

Conveying
Cut-to-length
Filling
Food & beverage
Linear measurement
Material handling
Metal forming & fabrication
Mobile equipement
Motor feedback
Packaging

Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Factory Lead Time	6 Weeks
Mounting Type	Surface Mount
Package / Case	80-VFBGA
Surface Mount	YES
Number of Pins	80
Weight	50.207005mg
Operating Temperature	-40°C~85°C
Packaging	Tray
JESD-609 Code	e0
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	80
Type	Stereo Audio
Terminal Finish	Tin/Lead (Sn/Pb)
Terminal Position	BOTTOM
Terminal Form	BALL
Peak Reflow Temperature (Cel)	220
Number of Functions	1
Base Part Number	TLV320AIC33
Pin Count	80
Power Supplies	1.83.3V
Interface	2-Wire, I2C, SPI, Serial
Max Supply Voltage	3.6V
Min Supply Voltage	1.1V
Number of Bits	24
Data Interface	I²C, Serial, SPI™
Sampling Rate	96 ksps
Voltage - Supply, Analog	2.7V~3.6V
Voltage - Supply, Digital	1.65V~1.95V
Power Consumption	14mW
Max Output Power	500mW
Signal to Noise Ratio (SNR)	92 dB
Number of D/A Converters	2
Resolution (Bits)	24 b
Number of Analog Inputs	10
Sigma Delta	Yes
Number of ADCs / DACs	2 / 2
Dynamic Range, ADCs / DACs (db) Typ	92 / 100
S/N Ratio, ADCs / DACs (db) Typ	92 / 100
Number of Analog Outputs	7
Height	1mm
Length	5mm
Width	5mm
Thickness	740μm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead