TLV320AIC33IGQER Overview
Due to space constraints, it is supplied in the 80-VFBGA package. This package uses the Tape & Reel (TR) packaging method. This electronic part is categorized as a type of Stereo Audio, making it capable of providing high-efficiency performance in a variety of applications. Surface Mount is the mounting type employed by this device. Operating performance -40°C~85°C permits it to function normally. In addition, it is equipped with 2 / 2 ADCs and DACs. The analog circuit receives 2.7V~3.6V as a supply voltage. It receives a voltage of 1.65V~1.95V as its supply voltage. In order to prevent signal reflections from off the end of the transmission line, 80 terminations are used. Essentially, it is an electronic device with 80 pins. There are 80 pins on this board. Using its base part number TLV320AIC33, it can be used to locate parts that are related. 3.6V is the maximum value of supply voltage. Minimum supply voltage should remain at 1.1V. Power supplies of 1.83.3V are used to operate it. Often in the process of converting digital signals into analog signals, there are 2 D/A converters.
TLV320AIC33IGQER Features
Embedded in the 80-VFBGA package
Operating temperature of -40°C~85°C
2 / 2 ADCs / DACs

TLV320AIC33IGQER Applications
There are a lot of Texas Instruments
TLV320AIC33IGQER CODECs Interface ICs applications.

Filling
Food & beverage
Linear measurement
Material handling
Metal forming & fabrication
Mobile equipement
Motor feedback
Packaging
Printing
Registration mark timing

Mounting Type	Surface Mount
Package / Case	80-VFBGA
Surface Mount	YES
Number of Pins	80
Weight	50.207005mg
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	80
Type	Stereo Audio
Terminal Finish	Tin/Lead (Sn/Pb)
Terminal Position	BOTTOM
Terminal Form	BALL
Peak Reflow Temperature (Cel)	220
Number of Functions	1
Terminal Pitch	0.5mm
Base Part Number	TLV320AIC33
Pin Count	80
Power Supplies	1.83.3V
Interface	2-Wire, I2C, SPI, Serial
Max Supply Voltage	3.6V
Min Supply Voltage	1.1V
Data Interface	I²C, Serial, SPI™
Sampling Rate	96 ksps
Voltage - Supply, Analog	2.7V~3.6V
Voltage - Supply, Digital	1.65V~1.95V
Power Consumption	14mW
Max Output Power	500mW
Signal to Noise Ratio (SNR)	92 dB
Number of D/A Converters	2
Resolution (Bits)	24 b
Sigma Delta	Yes
Number of ADCs / DACs	2 / 2
Dynamic Range, ADCs / DACs (db) Typ	92 / 100
S/N Ratio, ADCs / DACs (db) Typ	92 / 100
Length	5mm
Height Seated (Max)	1mm
Width	5mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead
Supplier Device Package	80-BGA MICROSTAR JUNIOR (5x5)
RoHS Status	Non-RoHS Compliant