TSC101CILT Overview
It is packaged in an SC-74A, SOT-753-case that protects the operational amplifiers from damage. An op amp of this type is a Current Sense-type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. It is estimated that there will be at least 5 terminations this year. A total of 5 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 12V battery and that the battery should be inserted in the amplifier. In total, the buffer amplifier consists of 5 pins. Op amp ic rates 1.5mV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. A supply current of 165μA can be used to operate this linear amplifier. There should be no change in the voltage gain at 40dB. There are a total of 1 channels available on the op amps. There are 2 elements in this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 18V. This linear amplifier also utiliANALOG CIRCUITes an analog IC known as a ANALOG CIRCUIT.
TSC101CILT Features
5 Pins
supply voltage of 12V
40dB voltage gain

TSC101CILT Applications
There are a lot of STMicroelectronics
TSC101CILT Instrumentational OP Amps applications.

Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering

Lifecycle Status	ACTIVE (Last Updated: 6 months ago)
Factory Lead Time	14 Weeks
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	SC-74A, SOT-753
Number of Pins	5
Operating Temperature	-40°C~125°C
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	5
ECCN Code	EAR99
Terminal Position	DUAL
Terminal Form	GULL WING
Number of Functions	1
Supply Voltage	12V
Base Part Number	TSC101
Pin Count	5
Operating Supply Voltage	18V
Number of Elements	2
Supply Voltage-Min (Vsup)	4V
Number of Channels	1
Analog IC - Other Type	ANALOG CIRCUIT
Operating Supply Current	165μA
Nominal Supply Current	300μA
Max Supply Current	300μA
Slew Rate	0.9V/μs
Amplifier Type	Current Sense
Common Mode Rejection Ratio	90 dB
Current - Input Bias	5.5μA
Voltage - Supply, Single/Dual (±)	4V~24V
Output Current per Channel	60mA
Input Offset Voltage (Vos)	1.5mV
Bandwidth	450 kHz
Voltage Gain	40dB
Voltage - Input Offset	200μV
Height	1.3mm
Length	3mm
Width	1.75mm
REACH SVHC	No SVHC
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free