TSU101ILT Overview
It is packaged in an SC-74A, SOT-753-case that protects the operational amplifiers from damage. An op amp of this type is a General Purpose-type. As far as the packaging is concerned, buffer op amp is delivered in a Cut Tape (CT) case. It is estimated that there will be at least 5 terminations this year. As a reminder, this buffer op amp should be powered by 1.8V battery and that the battery should be inserted in the amplifier. In total, the buffer amplifier consists of 5 pins. Op amp ic rates 3mV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. A supply current of 650nA can be used to operate this linear amplifier. There should be no change in the voltage gain at 130dB. There are a total of 1 channels available on the op amps. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals.
TSU101ILT Features
supply voltage of 1.8V
130dB voltage gain
Output Type: Rail-to-Rail

TSU101ILT Applications
There are a lot of STMicroelectronics
TSU101ILT Instrumentational OP Amps applications.

Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering

Lifecycle Status	ACTIVE (Last Updated: 6 months ago)
Factory Lead Time	14 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	SC-74A, SOT-753
Number of Pins	5
Operating Temperature	-40°C~85°C
Packaging	Cut Tape (CT)
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	5
ECCN Code	EAR99
Terminal Position	DUAL
Terminal Form	GULL WING
Number of Functions	1
Supply Voltage	1.8V
Base Part Number	TSU101
Output Type	Rail-to-Rail
Number of Channels	1
Operating Supply Current	650nA
Nominal Supply Current	580nA
Slew Rate	0.003V/μs
Amplifier Type	General Purpose
Common Mode Rejection Ratio	65 dB
Current - Input Bias	5pA
Max Input Voltage	5V
Voltage - Supply, Single/Dual (±)	1.5V~5.5V
Output Current per Channel	11mA
Input Offset Voltage (Vos)	3mV
Bandwidth	9 kHz
Unity Gain BW-Nom	8 kHz
Voltage Gain	130dB
Average Bias Current-Max (IIB)	0.00003μA
Power Supply Rejection Ratio (PSRR)	90dB
Supply Voltage Limit-Max	6V
Max Frequency	2.4GHz
Height	1.3mm
Length	3mm
Width	1.75mm
REACH SVHC	No SVHC
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free