UCC5617DWP OverviewA 18 termination consists of terminating transmission lines with a device matching the line's characteristic impedance. The 28-SOIC (0.295, 7.50mm Width) is well known in the electronic industry due to its low package cost. The Packaging follows Tube's materials. It is mounted in the way of Surface Mount. It is recommended that the Operating Temperature not exceed 0°C~70°C. It is a SCSI-qualified material for standard applications. For finding related parts, you can use Base Part Number UCC5617. It is intended to use the 28 pins for a specific purpose. There are 18 signal lines, which mean those lines for public or private signal or communication service and devoted exclusively to the transmission of signals or intelligence. The Supply Voltage should be maintained at 4.75V for high efficiency. There is a Surface Mount-mount on it. Computers and other communications devices use 28 pins, which are pronged contacts. In order to operate, 5V Power Supplies are required. Resistance is a measure of the opposition to current flow in an electrical circuit. The resistance of this electrical device is 110Ohm (Ω). To fully function, 420mA needs a supply current. The system runs on a minimal supply voltage of 4V. When 5.25V is maximal, it operates at maximum voltage. This electronic part can have up to 1 eligible receivers/drivers on the field at once.
UCC5617DWP Features18 terminations
Tube package
UCC5617 family
28 pin count
18 signal lines
28 pins
5V power supplies
UCC5617DWP ApplicationsThere are a lot of Texas Instruments
UCC5617DWP Signal Terminators applications.
Data Networking
CSU and DSU
Data Routers
Programmable logic controller
Remote input module
Data Networking
PCI Cards
Telecommunication Equipment
Data Routers
Data Switches
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Weight | 792.000628mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Type | SCSI |
| Resistance | 110Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.75V |
| Base Part Number | UCC5617 |
| Pin Count | 28 |
| Power Supplies | 5V |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4V |
| Operating Supply Current | 420mA |
| Nominal Supply Current | 440mA |
| Differential Output | NO |
| Number of Drivers | 1 |
| Number of Signal Lines | 18 |
| Pull-up Resistance-Nom | 110Ohm |
| Height | 2.35mm |
| Length | 18mm |
| Width | 7.52mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Surface Mount | YES |
| HTS Code | 8542.39.00.01 |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| JESD-30 Code | R-PDSO-G28 |
| Supply Voltage-Max (Vsup) | 5.25V |
| Supply Voltage-Min (Vsup) | 4V |
| Length | 17.9mm |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
UCC5617DWP Datasheet
+8613715157867