WM8581AGEFT/RV OverviewIt is supplied in the TQFP package for the purpose of space saving. There are 48 terminations used to prevent signals from reflecting off the end of the transmission line. It is a kind of 48-pin electronic device. It is mounted to a PCB based on the Surface Mount technology. The maximum value of supply voltage should be maintained at 5.5V. There are 1 A/D converters used to convert the analog signals into digital signals. The minimum value of supply voltage should be maintained at 2.97V. It operates with the supply voltage of 3.3V. There are 4 D/A converters used to convert the digital signals into analog signals. The operating temperature is set with the maximum value of 85°C to keep normal use. The operating temperature is set with the minimum value of -40°C to keep normal use. The normal electrical current of 30mA that is expected to flow through the circuit at any given time. It operates with the supply voltage of 30mA.
WM8581AGEFT/RV FeaturesEmbedded in the TQFP package
1 A/D converters
Operating supply current of 30mA
WM8581AGEFT/RV ApplicationsThere are a lot of Cirrus Logic
WM8581AGEFT/RV CODECs Interface ICs applications.
Aerospace
Autonomous vehicles & robots
Backstop gauging
Ball screw positioning
Converting
Conveying
Cut-to-length
Filling
Food & beverage
Linear measurement
Mount | Surface Mount |
Package / Case | TQFP |
Number of Pins | 48 |
Weight | 9.071791g |
Number of Terminations | 48 |
Max Operating Temperature | 85°C |
Min Operating Temperature | -40°C |
Terminal Position | QUAD |
Terminal Form | GULL WING |
Number of Functions | 1 |
Supply Voltage | 3.3V |
Terminal Pitch | 0.5mm |
Temperature Grade | INDUSTRIAL |
Interface | 2-Wire, Serial |
Max Supply Voltage | 5.5V |
Min Supply Voltage | 2.97V |
Operating Supply Current | 30mA |
Nominal Supply Current | 30mA |
Operating Mode | SYNCHRONOUS |
Resolution | 3 B |
Number of A/D Converters | 1 |
Telecom IC Type | PCM CODEC |
Signal to Noise Ratio (SNR) | 100 dB |
Number of D/A Converters | 4 |
Filter | YES |
Length | 7mm |
Width | 7mm |
RoHS Status | RoHS Compliant |