X9C102SIZ OverviewThe file is contained in 8-SOIC (0.154, 3.90mm Width) packages.The pentometer is stored from Non-Volatile.In this digital potentiometer, there are 1 embedded circuits.The digital analogic can be secured by using the Tube package.A 100 tap protects this pentometer from overcurrents.There are 100 positions in pentometer.This termination is designed for 8.In this programmable potentiometer, you will find 1 functions.As shown, the total resistance of the speed potentiometers will be 1000Ohm.In order for it to perform, it relies on 5V.The digi devices has 8 pins.The way to mount is Surface Mount.There is 5V voltage limit on the potentionmeter.This digital potentiometer is used to detect temperature in the -40°C~85°C range.It is possible to limit the flow with 1kOhm.X9C102 is a family member.
X9C102SIZ FeaturesAvailable in 8-SOIC (0.154, 3.90mm Width) package
1 Circuits
Mounting Type: Surface Mount
Operate temperature at the range of -40°C~85°C
X9C102SIZ ApplicationsThere are a lot of Renesas Electronics America Inc.
X9C102SIZ Digital Potentiometers applications.
Household appliances
Modern office equipment
Industrial control
Medical equipment
Refrigerator
Programmable computer
Power supply
Power meter
Automatic detection of equipment
Optic fiber network
| Factory Lead Time | 8 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | XDCP™ |
| Published | 2005 |
| Tolerance | ±20% |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Temperature Coefficient | 300 ppm/°C |
| Resistance | 1kOhm |
| Number of Positions | 100 |
| Terminal Finish | MATTE TIN |
| Voltage - Supply | 5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | X9C102 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Configuration | Potentiometer |
| Interface | Up/Down (U/D, INC, CS) |
| Number of Circuits | 1 |
| Memory Type | Non-Volatile |
| Taper | Linear |
| Number of Taps | 100 |
| Total Resistance | 1000Ohm |
| Resistance - Wiper (Ω) (Typ) | 40 |
| Resistor Terminal Voltage-Max | 5V |
| Temperature Coefficient (Typ) | ±600ppm/°C |
| Resistor Terminal Voltage-Min | -5V |
| Length | 4.9022mm |
| RoHS Status | ROHS3 Compliant |