XCR3256XL-12TQG144I Overview
256 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.The item is enclosed in a 144-LQFP package.The device is programmed with 120 I/O ports.It is programmed to terminate devices at 144.There is a QUAD terminal position on the electrical part in question.The device is powered by a voltage of 3.3V volts.It is recommended that the chip be packaged by Tray.Ensure its reliability by operating at -40°C~85°C TA.It is recommended to mount the chip by Surface Mount.FPGAs belonging to the CoolRunner XPLA3 series contain this type of chip.With 144 pins programmed, the chip is ready to use.When using this device, YES is also available.6000 gates are used to construct digital circuits.If high efficiency is desired, the supply voltage should be kept at 3.3V.It is recommended that data be stored in EEPROM.In this case, it is mounted by Surface Mount.The pins are 144.Initially, the maximum supply voltage (Vsup) is 3.6V.It is important to make sure that the maximum frequency is less than 88MHz.An elementary building block consists of 16logic elements/cells.
XCR3256XL-12TQG144I Features
144-LQFP package
120 I/Os
The operating temperature of -40°C~85°C TA
144 pin count
144 pins

XCR3256XL-12TQG144I Applications
There are a lot of Xilinx Inc.
XCR3256XL-12TQG144I CPLDs applications.

Digital systems
Portable digital devices
Handheld digital devices
Battery operated portable devices
Complex programmable logic devices
Digital designs
Field programmable gate
Address decoding
D/T registers and latches
Synchronous or asynchronous mode

Factory Lead Time	10 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	144-LQFP
Number of Pins	144
Operating Temperature	-40°C~85°C TA
Packaging	Tray
Series	CoolRunner XPLA3
Published	1996
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	144
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Additional Feature	YES
HTS Code	8542.39.00.01
Terminal Position	QUAD
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Supply Voltage	3.3V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	30
Pin Count	144
Qualification Status	Not Qualified
Operating Supply Voltage	3.3V
Supply Voltage-Max (Vsup)	3.6V
Programmable Type	In System Programmable (min 1K program/erase cycles)
Number of I/O	120
Memory Type	EEPROM
Propagation Delay	12 ns
Number of Logic Elements/Cells	16
Number of Gates	6000
Max Frequency	88MHz
Speed Grade	12
Output Function	MACROCELL
Number of Macro Cells	256
JTAG BST	YES
Voltage Supply - Internal	2.7V~3.6V
Delay Time tpd(1) Max	10.8ns
Length	20mm
Height Seated (Max)	1.6mm
Width	20mm
RoHS Status	ROHS3 Compliant