XPD1001000-01 Overview
Microcontroller MPU Core is a module or board.A DSTni-EX-core processor drives microprocessor chip.Default settings for the microcontroller are -40°C~85°C.512KB is the size of the flash on the MCU electronics.The connector type is RJ45.XPort® Direct+™-Series.The RAM is reduced to 256KB in order to ensure that the software is able to run normally.25MHz speed is used by the MCU chip.Module package is included.At this time, 85°C is the maximum operational temperature.Microprocessor should be warmer than -40°C when operating.A XPort Direct+ Core Processor drives it.The operating voltage of this microcontrollers is 3.3V volts.The package size is Bulk.It is set at 200mA to supply current to the MCUs.
XPD1001000-01 Features
Core processor of DSTni-EX
Flash size of 512KB
Speed of 25MHz
Bulk packaging

XPD1001000-01 Applications
There are a lot of Lantronix, Inc.
XPD1001000-01 Microcontroller, Microprocessor, FPGA Modules applications.

Industrial Instrumentation
Embedded Control Processing
Embedded User Interfaces
Test and Measurement
Medical Devices
Data Acquisition
Industrial Control
Process Control
Process Monitoring
Healthcare Monitoring

Factory Lead Time	6 Weeks
Mount	Through Hole
Package / Case	Module
Number of Pins	24
Operating Temperature	-40°C~85°C
Packaging	Bulk
Series	XPort® Direct+™
Published	2008
Size / Dimension	1.25 x 1.7 31.8mmx43.3mm
Part Status	Active
Moisture Sensitivity Level (MSL)	Not Applicable
Connector Type	RJ45
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Operating Supply Voltage	3.3V
Interface	Ethernet, Serial
Operating Supply Current	200mA
Speed	25MHz
RAM Size	256KB
Core Processor	DSTni-EX
Data Rate	921 kbps
Module/Board Type	MPU Core
Flash Size	512KB
Co-Processor	XPort Direct+
Radiation Hardening	No
RoHS Status	ROHS3 Compliant