XPDNC200S-01 Overview
In this case, the module or board type of the microcontroller is MPU Core.With DSTni-EX cores, the processor drives microprocessor chip.In order to use the microcontroller, the default setting is -40°C~85°C.The size of the flash on the MCU electronics is 512KB.The connector type RJ45 refers to the connector type.The XPort® Direct+™ Series is the group in which MCU chip belongs.As a precaution for ensuring that the software runs normally, the RAM size of the computer has been reduced to 256KB.In this case, the MCU chip operates at a 25MHz speed.This package comes with Module.As of this microprocessor, 85°C is the maximum operating temperature.Operating temperatures should be warmer than -40°C.Microprocessor chip is powered by a XPort Direct+ Core Processor.A 3.3V-volt supply is needed to power this microcontrollers.The MCUs is set to have a supply current of 200mA when the MCUs is powered on.
XPDNC200S-01 Features
Core processor of DSTni-EX
Flash size of 512KB
Speed of 25MHz

XPDNC200S-01 Applications
There are a lot of Lantronix, Inc.
XPDNC200S-01 Microcontroller, Microprocessor, FPGA Modules applications.

Data Acquisition
Industrial Control
Process Control
Process Monitoring
Healthcare Monitoring
Patient Monitoring
IoT Secure Gateways
Human Machine Interface
Human Machine Control Panel
Home and Building Automation

Factory Lead Time	4 Weeks
Package / Case	Module
Operating Temperature	-40°C~85°C
Series	XPort® Direct+™
Published	2008
Size / Dimension	1.25 x 1.7 31.8mmx43.3mm
Part Status	Active
Moisture Sensitivity Level (MSL)	Not Applicable
Connector Type	RJ45
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Operating Supply Voltage	3.3V
Interface	Serial
Operating Supply Current	200mA
Number of Ports	1
Speed	25MHz
RAM Size	256KB
Core Processor	DSTni-EX
Data Rate	921 kbps
Module/Board Type	MPU Core
Flash Size	512KB
Co-Processor	XPort Direct+
RoHS Status	RoHS Compliant