XR16C2852IJ-F OverviewIn order to make it more cost-effective, this product is also available in a package of PLCC.The transmission of information is carried out through 2 channels.There is an uPs/uCs/Peripheral ICs type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL which is used for it.In order to configure this device, 44 terminations are used.In order for it to operate, a voltage of 5V must be provided.Data communication is supported by 2 serial I/Os.This electronic device belongs to the 44-pin IC family.In this IC, the clock frequency is 50MHz.For a long-term satisfactory performance, it is necessary not to exceed the operating temperature of -40°C.The operating temperature should be in excess of 85°C to ensure the normal work for a long time.The 44 pins are at the core of the device's configuration.The device is mounted in accordance with Surface Mount.As long as the supply voltage is kept below 5.5V, reliability can be ensured.Having a voltage higher than 2.97V can ensure reliability.Providing 3.3/5V power supplies is reliable and efficient for electronic designers.Furthermore, it was shown to be capable of performing ALSO OPERATES AT 3.3V SUPPLY.
XR16C2852IJ-F Features2 serial I/Os
Clock frequency of 50MHz
Power supplies of 3.3/5V
ALSO OPERATES AT 3.3V SUPPLY
XR16C2852IJ-F ApplicationsThere are a lot of Exar Corporation
XR16C2852IJ-F UARTs applications.
Cellular Phones DataPort
Wireless Infrared Data Communications Systems
Handheld Terminals and Tablets
Handheld Computers
Wireless Portable Point-of-Sale Terminals
GPS Devices
Personal Digital Assistants Modules
Battery Operated Instruments
Multimedia Systems
Serial to Parallel/Parallel to Serial Converter
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 44 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ALSO OPERATES AT 3.3V SUPPLY |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 44 |
| Power Supplies | 3.3/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.97V |
| Nominal Supply Current | 4mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 50MHz |
| Data Rate | 3 Mbps |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Number of Serial I/Os | 2 |
| Communication Protocol | ASYNC, BIT |
| Data Encoding/Decoding Method | NRZ |
| Height | 3.68mm |
| Length | 16.66mm |
| Width | 16.66mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 26 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Surface Mount | YES |
| Packaging | Tube |
| Published | 2005 |
| Feature | Internal Oscillator, Timer/Counter |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| HTS Code | 8542.31.00.01 |
| Voltage - Supply | 2.97V~5.5V |
| Terminal Pitch | 1.27mm |
| JESD-30 Code | S-PQCC-J44 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 85°C |
| Operating Temperature (Min) | -40°C |
| Number of Channels | 2, DUART |
| Address Bus Width | 3 |
| Protocol | RS232, RS485 |
| External Data Bus Width | 8 |
| Data Rate (Max) | 3.125Mbps |
| Data Transfer Rate-Max | 0.390625 MBps |
| FIFO's | 128 Byte |
| With False Start Bit Detection | Yes |
| Length | 16.585mm |
| Height Seated (Max) | 4.572mm |
| Width | 16.585mm |
XR16C2852IJ-F Datasheet
+8613715157867