XR16V564IL-F Overview
In order to make it more cost-effective, this product is also available in a package of 48-VFQFN Exposed Pad.The transmission of information is carried out through 4, QUART channels.When UART comes to packaging, Tray is adopted as the packaging method.There is an uPs/uCs/Peripheral ICs type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL which is used for it.In order to configure this device, 48 terminations are used.In order for it to operate, a voltage of 3.3V must be provided.At present, this electronic part is in the state of Active.Data communication is supported by 4 serial I/Os.Mounting is done through Surface Mount.UART operates on a voltage of 2.25V~3.6V.In this IC, the clock frequency is 64MHz.A few characteristics of Internal Oscillator, Timer/Counter can be found in it.The device is capable of operating at temperatures as high as 85°C.Furthermore, it was shown to be capable of performing ALSO OPERATES AT 2.5 V SUPPLY.A minimum temperature of -40°C is required to operate it.
XR16V564IL-F Features
4 serial I/Os
Clock frequency of 64MHz
ALSO OPERATES AT 2.5 V SUPPLY

XR16V564IL-F Applications
There are a lot of MaxLinear, Inc.
XR16V564IL-F UARTs applications.

Cellular Phones DataPort
Wireless Infrared Data Communications Systems
Handheld Terminals and Tablets
Handheld Computers
Wireless Portable Point-of-Sale Terminals
GPS Devices
Personal Digital Assistants Modules
Battery Operated Instruments
Multimedia Systems
Serial to Parallel/Parallel to Serial Converter

Mounting Type	Surface Mount
Package / Case	48-VFQFN Exposed Pad
Surface Mount	YES
Packaging	Tray
JESD-609 Code	e3
Feature	Internal Oscillator, Timer/Counter
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	48
Terminal Finish	Matte Tin (Sn)
Additional Feature	ALSO OPERATES AT 2.5 V SUPPLY
HTS Code	8542.31.00.01
Voltage - Supply	2.25V~3.6V
Terminal Position	QUAD
Terminal Form	NO LEAD
Peak Reflow Temperature (Cel)	260
Supply Voltage	3.3V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	40
JESD-30 Code	S-XQCC-N48
Qualification Status	Not Qualified
Operating Temperature (Max)	85°C
Operating Temperature (Min)	-40°C
Temperature Grade	INDUSTRIAL
Number of Channels	4, QUART
uPs/uCs/Peripheral ICs Type	SERIAL IO/COMMUNICATION CONTROLLER, SERIAL
Clock Frequency	64MHz
Address Bus Width	3
Protocol	RS232
Boundary Scan	NO
Low Power Mode	YES
External Data Bus Width	8
Data Rate (Max)	16Mbps
Number of Serial I/Os	4
Data Transfer Rate-Max	2 MBps
FIFO's	32 Byte
With False Start Bit Detection	Yes
Length	7mm
Height Seated (Max)	1mm
Width	7mm
RoHS Status	RoHS Compliant