AD8397ARDZ-REEL7 OverviewPackaged in a 8-SOIC (0.154, 3.90mm Width) Exposed Pad case, the buffer op amp is ready to use. An op amp ic of the Voltage Feedback type. The op amp is delivered to you in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 8. The pins on this board total to 8 in total. I would like to remind you that this buffer op amp should be powered by an 12V battery. A total of 8 pins are present on the instrumentation amplifier. There is an input offset voltage of 3mV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . As long as the supply current of the chip does not exceed 11mA, this op amp ic can operate. Keeping the voltage gain at 90dB is the best course of action. As far as the device is concerned, buffer amplifier has 2 channels. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. For packing the buffer amplifier, the TAPE AND REEL-axis is adopted. Currently, linear amplifier is operating with a quiescent current of 11mA.
AD8397ARDZ-REEL7 Features8 Pins
supply voltage of 12V
90dB voltage gain
Output Type: Rail-to-Rail
AD8397ARDZ-REEL7 ApplicationsThere are a lot of Analog Devices Inc.
AD8397ARDZ-REEL7 Instrumentational OP Amps applications.
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Factory Lead Time | 8 Weeks |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Packing Method | TAPE AND REEL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8397 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Channels | 2 |
| Operating Supply Current | 11mA |
| Quiescent Current | 11mA |
| Supply Current-Max | 30mA |
| Slew Rate | 53V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 96 dB |
| Current - Input Bias | 200pA |
| Voltage - Supply, Single/Dual (±) | 3V~24V ±1.5V~12V |
| Output Current per Channel | 310mA |
| Input Offset Voltage (Vos) | 3mV |
| Gain Bandwidth Product | 35MHz |
| Neg Supply Voltage-Nom (Vsup) | -12V |
| Unity Gain BW-Nom | 14000 kHz |
| Voltage Gain | 90dB |
| Average Bias Current-Max (IIB) | 0.9μA |
| Power Supply Rejection Ratio (PSRR) | 86dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1mV |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 69MHz |
| Bias Current-Max (IIB) @25C | 0.9μA |
| Programmable Power | NO |
| Input Capacitance | 1.4pF |
| Wideband | NO |
| Length | 4.9mm |
| Height Seated (Max) | 1.75mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8397ARDZ-REEL7 Datasheet
+8613715157867