LM2902YDT OverviewThere is a 14-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the General Purpose-type. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. We are approaching the 14h termination of the year. In total, there are 14 pins on this op amp ic. This linear amplifier should be powered by an 5V battery. 14 pins are located on the operational amplifiers. The input offset voltage is 7mV. This electrical part should be mounted using type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . The buffer amplifier is capable of operating from a supply current of 1.5mA . It is recommended to keep the voltage gain at 100dB at all times. The total number of elements in this buffer amplifier is 4. The operating supply voltage of the buffer op amp is rated at 28V. This linear amplifier pack is based on the TAPE AND REEL axis. Instrumentation amplifiers are numbered by their Automotive, AEC-Q100 series.
LM2902YDT Features14 Pins
supply voltage of 5V
100dB voltage gain
LM2902YDT ApplicationsThere are a lot of STMicroelectronics
LM2902YDT Instrumentational OP Amps applications.
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering
Signal operation
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Factory Lead Time | 10 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TAPE AND REEL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LM2902 |
| Pin Count | 14 |
| Operating Supply Voltage | 28V |
| Number of Elements | 4 |
| Power Supplies | +-1.5/+-15/3/30V |
| Operating Supply Current | 1.5mA |
| Nominal Supply Current | 1.5mA |
| Output Current | 70mA |
| Slew Rate | 0.4V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 20nA |
| Voltage - Supply, Single/Dual (±) | 3V~30V ±1.5V~15V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 7mV |
| Bandwidth | 1.3MHz |
| Unity Gain BW-Nom | 1300 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.3μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 32V |
| Voltage - Input Offset | 2mV |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.15μA |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Power | NO |
| Height | 1.65mm |
| Length | 8.75mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM2902YDT Datasheet
+8613715157867