ADA4817-2ACPZ-R7 OverviewIt is packaged in an 16-WQFN Exposed Pad, CSP-case that protects the operational amplifiers from damage. An op amp of this type is a Voltage Feedback-type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. It is estimated that there will be at least 16 terminations this year. A total of 16 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. In total, the buffer amplifier consists of 16 pins. Op amp ic rates 2mV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~105°C. A supply current of 42mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 63dB. There are a total of 2 channels available on the op amps. The operating supply voltage of the buffer op amp is rated at 9V. An buffer amplifier is packed in a TAPE AND REEL-shape according to the design. Buffer op amp series numbers are indicated by the FastFET™. The quiescent current is 21mA.
ADA4817-2ACPZ-R7 Features16 Pins
supply voltage of 5V
63dB voltage gain
ADA4817-2ACPZ-R7 ApplicationsThere are a lot of Analog Devices Inc.
ADA4817-2ACPZ-R7 Instrumentational OP Amps applications.
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Factory Lead Time | 10 Weeks |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-WQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| Series | FastFET™ |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Packing Method | TAPE AND REEL |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ADA4817 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 9V |
| Number of Channels | 2 |
| Operating Supply Current | 42mA |
| Nominal Supply Current | 42mA |
| Output Current | 70mA |
| Quiescent Current | 21mA |
| Slew Rate | 870V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | -90 dB |
| Current - Input Bias | 2pA |
| Voltage - Supply, Single/Dual (±) | 5V~10V ±2.5V~5V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 1.05 GHz |
| Gain Bandwidth Product | 410MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 410000 kHz |
| Voltage Gain | 63dB |
| Power Supply Rejection Ratio (PSRR) | -72dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 400μV |
| Settling Time | 9 ns |
| Low-Bias | YES |
| Micropower | NO |
| Dual Supply Voltage | 3V |
| Input Capacitance | 1.5pF |
| Height | 900μm |
| Length | 3.25mm |
| Width | 2.95mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4817-2ACPZ-R7 Datasheet
+8613715157867