LMV934MA OverviewA 14-SOIC (0.154, 3.90mm Width) case is used to package the op amp. General Purpose-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tube case. It is estimated that there will be 14 terminations in the next few months. There are a total of 14 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 2.7V volts. There are 14 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 1mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . An 116μA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. There are 4 channels on the operational amplifiers. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages.
LMV934MA Features14 Pins
supply voltage of 2.7V
100dB voltage gain
Output Type: Rail-to-Rail
LMV934MA ApplicationsThere are a lot of Texas Instruments
LMV934MA Instrumentational OP Amps applications.
Addition operation circuits
Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Lifecycle Status | NRND (Last Updated: 1 day ago) |
Mount | Surface Mount |
Mounting Type | Surface Mount |
Package / Case | 14-SOIC (0.154, 3.90mm Width) |
Number of Pins | 14 |
Operating Temperature | -40°C~125°C |
Packaging | Tube |
JESD-609 Code | e0 |
Part Status | Not For New Designs |
Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
Number of Terminations | 14 |
ECCN Code | EAR99 |
Terminal Finish | Tin/Lead (Sn/Pb) |
Terminal Position | DUAL |
Terminal Form | GULL WING |
Peak Reflow Temperature (Cel) | 235 |
Number of Functions | 4 |
Supply Voltage | 2.7V |
Terminal Pitch | 1.27mm |
Time@Peak Reflow Temperature-Max (s) | 30 |
Base Part Number | LMV934 |
Pin Count | 14 |
Output Type | Rail-to-Rail |
Power Supplies | 2/5V |
Number of Channels | 4 |
Operating Supply Current | 116μA |
Nominal Supply Current | 103μA |
Output Current | 8mA |
Slew Rate | 0.42V/μs |
Architecture | VOLTAGE-FEEDBACK |
Amplifier Type | General Purpose |
Common Mode Rejection Ratio | 50 dB |
Current - Input Bias | 14nA |
Voltage - Supply, Single/Dual (±) | 1.8V~5V |
Output Current per Channel | 100mA |
Input Offset Voltage (Vos) | 1mV |
Bandwidth | 1.5MHz |
Unity Gain BW-Nom | 1500 kHz |
Voltage Gain | 100dB |
Average Bias Current-Max (IIB) | 0.05μA |
Power Supply Rejection Ratio (PSRR) | 70dB |
Low-Offset | NO |
Frequency Compensation | YES |
Supply Voltage Limit-Max | 6V |
Low-Bias | NO |
Micropower | YES |
Bias Current-Max (IIB) @25C | 0.035μA |
Programmable Power | NO |
Input Offset Current-Max (IIO) | 0.025μA |
Height | 1.75mm |
Length | 8.65mm |
Width | 3.91mm |
Thickness | 1.58mm |
REACH SVHC | No SVHC |
Radiation Hardening | No |
RoHS Status | Non-RoHS Compliant |
Lead Free | Contains Lead |