CDCV855IPW OverviewThis clock IC is packaged using the Tube method. The 28-TSSOP (0.173, 4.40mm Width) package includes this clock generator. In the reflowing process, this clock generator ic is able to maintain a maximum temperature of 260. In it, there are 28 terminations to be found. This time clock generator should be voltaged at 2.5V. A clock generator's input is called SSTL-2 and it is designed as the input for this clock generator. For full access to the electronic component's capabilities, 1 circuits are implemented. A clock-based RF synthesizer that provides a max frequency of 180MHz is available. With the Surface Mount, it is easy to install this electric component on the panel. Clock generators can take up to 2.7V of power as a maximum supply voltageThis frequency synthesizer requires a supply voltage above 2.3V to be safe. This clock PLL works with a supply voltage of 2.3V~2.7V. Using the test statistics, it is estimated that the ambient temperature should be set to -40°C~85°C. A PLL Clock Driver is a classification for the electronic part in question. Microprocessors are specifically designed to use this clock-generating IC, which has a 28-bit output. This part number CDCV855 is related to the following electrical components. There is a low timing skew at 0.05 nsmax with this RF synthesizer. The clock generator is configured with 4 pins for enabling true outputs. A search for the 855 family will yield similar electronic components.
CDCV855IPW FeaturesAvailable in the 28-TSSOP (0.173, 4.40mm Width)
Supply voltage of 2.5V
4 true outputs
CDCV855IPW ApplicationsThere are a lot of Texas Instruments
CDCV855IPW Clock Generators applications.
Digital circuits
Wireless base station for LTE, LTE-advanced
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel
PCI express cards
| Mounting Type | Surface Mount |
| Package / Case | 28-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | PLL Clock Driver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Voltage - Supply | 2.3V~2.7V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CDCV855 |
| Pin Count | 28 |
| JESD-30 Code | R-PDSO-G28 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 2.7V |
| Power Supplies | 2.5V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Number of Circuits | 1 |
| Frequency (Max) | 180MHz |
| Family | 855 |
| Output Characteristics | 3-STATE |
| Input | SSTL-2 |
| Ratio - Input:Output | 1:5 |
| PLL | Yes with Bypass |
| Differential - Input:Output | Yes/Yes |
| Propagation Delay (tpd) | 4.5 ns |
| Divider/Multiplier | No/No |
| Same Edge Skew-Max (tskwd) | 0.05 ns |
| Number of True Outputs | 4 |
| Length | 9.7mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
+8613715157867