SI5326A-C-GM Overview
Tray-method packaging is used for clock ICs. The 36-VFQFN Exposed Pad package contains this clock generator. This clock generator ic can sustain a maximum temperature of 260 during reflowing. It contains 36 terminations that can be found in frequency synthesizer. The input of this clock generator is designed to be LVCMOS, LVDS, LVPECL, Crystal. To access the full performance of the electronic component, 1 circuits are implemented. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. As far as the supply voltage is concerned, clock PLL can be used with 1.71V~3.63V. Based on the test statistics, an ambient temperature of -40°C~85°C should be set. As the name suggests, this is a clock generator that is compatible with CML, LVCMOS, LVDS, LVPECL logic levels. This electronic component is usually classified as a Clock Multiplier, Jitter Attenuator component. The clock-generating IC is a 36-bit device designed specifically for microprocessors. You can find related electrical components to the base part number SI5326. It is possible to connect to the frequency generators via 36 pins. The DSPLL® series includes this electronic part. 2 signal outputs enable clock PLL to magnify output frequency as high as possible. At a frequency of 1.4GHz, frequency generator is capable of achieving high efficiency. For the RF synthesizer to function properly, a supply current of 251mA must be provided.
SI5326A-C-GM Features
Available in the 36-VFQFN Exposed Pad

SI5326A-C-GM Applications
There are a lot of Silicon Labs
SI5326A-C-GM Clock Generators applications.

Automatic test equipment
Wide area power system
Digital circuits
Wireless base station for LTE, LTE-advanced
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange

Factory Lead Time	6 Weeks
Mounting Type	Surface Mount
Package / Case	36-VFQFN Exposed Pad
Surface Mount	YES
Number of Pins	36
Weight	92.589543mg
Operating Temperature	-40°C~85°C
Packaging	Tray
Series	DSPLL®
Published	1997
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	36
Type	Clock Multiplier, Jitter Attenuator
Voltage - Supply	1.71V~3.63V
Terminal Position	QUAD
Peak Reflow Temperature (Cel)	260
Terminal Pitch	0.5mm
Frequency	1.4GHz
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	SI5326
Output	CML, LVCMOS, LVDS, LVPECL
Pin Count	36
Number of Outputs	2
Number of Circuits	1
Operating Supply Current	251mA
Input	LVCMOS, LVDS, LVPECL, Crystal
Ratio - Input:Output	3:2
PLL	Yes
Differential - Input:Output	Yes/Yes
Height	800μm
Length	6mm
Width	6mm
Radiation Hardening	No
RoHS Status	RoHS Compliant