CY7B9910-7SC OverviewTube-method packaging is used for clock ICs. The 24-SOIC (0.295, 7.50mm Width) package contains this clock generator. This clock generator ic can sustain a maximum temperature of 225 during reflowing. It contains 24 terminations that can be found in frequency synthesizer. This electronic frequency generator requires a voltage of 5V. The input of this clock generator is designed to be Clock. To access the full performance of the electronic component, 1 circuits are implemented. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. As far as the supply voltage is concerned, clock PLL can be used with 4.5V~5.5V. Based on the test statistics, an ambient temperature of 0°C~70°C should be set. As the name suggests, this is a clock generator that is compatible with TTL logic levels. This electronic component is usually classified as a Fanout Buffer (Distribution), Zero Delay Buffer component. The clock-generating IC is a 24-bit device designed specifically for microprocessors. You can find related electrical components to the base part number CY7B9910. It is possible to connect to the frequency generators via 24 pins. There is a maximum supply voltage of 5V that clock generator can handle. 8 signal outputs enable clock PLL to magnify output frequency as high as possible. At 0.75 ns Max, this clock generator offers low timing skew. When searching for parts of the 7B family, similar frequency generators will be found. At a frequency of 80MHz, frequency generator is capable of achieving high efficiency. This frequency synthesizer operates at a maximum current of 85mA.
CY7B9910-7SC FeaturesAvailable in the 24-SOIC (0.295, 7.50mm Width)
Supply voltage of 5V
Operating supply voltage of 5V
CY7B9910-7SC ApplicationsThere are a lot of Cypress Semiconductor Corp
CY7B9910-7SC Clock Generators applications.
Automatic test equipment
Wide area power system
Digital circuits
Wireless base station for LTE, LTE-advanced
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | TIN LEAD |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Frequency | 80MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY7B9910 |
| Output | TTL |
| Pin Count | 24 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Circuits | 1 |
| Power Dissipation | 78mW |
| Max Supply Current | 85mA |
| Family | 7B |
| Input | Clock |
| Ratio - Input:Output | 1:8 |
| Max I(ol) | 0.046 A |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Prop. Delay@Nom-Sup | 0.7 ns |
| Propagation Delay (tpd) | 0.7 ns |
| Same Edge Skew-Max (tskwd) | 0.75 ns |
| Duty Cycle | 50 % |
| Height | 2.368mm |
| Length | 15.62mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
CY7B9910-7SC Datasheet
+8613715157867