STUW81300T Overview
Clock ICs are packaged using the Tray method. A maximum temperature of NOT SPECIFIED can be sustained by this clock generator ic during reflowing. There are a total of 36 terminations in this file. A voltage of 3.3V should be applied to this electronic frequency generator. There is a maximum voltage of 5.4V for this clock generator. Keeping the supply voltage for this frequency synthesizer above 3V is recommended for safety reasons. The PLL may become ha85°Cardous once the operating temperature exceeds 85°C. A temperature of less than -40°C may cause this clock PLL to fail to start. The related electrical components for the base part number STUW813 can be found below. Analog ICs are classified as PHASE LOCKED LOOP-devices and this RF synthesizer is one.
STUW81300T Features
Supply voltage of 3.3V

STUW81300T Applications
There are a lot of STMicroelectronics
STUW81300T Clock Generators applications.

Wide area power system
Digital circuits
Wireless base station for LTE, LTE-advanced
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel

Lifecycle Status	ACTIVE (Last Updated: 7 months ago)
Surface Mount	YES
Packaging	Tray
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	36
Terminal Position	QUAD
Terminal Form	NO LEAD
Peak Reflow Temperature (Cel)	NOT SPECIFIED
Number of Functions	1
Supply Voltage	3.3V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	STUW813
JESD-30 Code	S-XQCC-N36
Operating Temperature (Max)	85°C
Operating Temperature (Min)	-40°C
Supply Voltage-Max (Vsup)	5.4V
Temperature Grade	INDUSTRIAL
Supply Voltage-Min (Vsup)	3V
Analog IC - Other Type	PHASE LOCKED LOOP
Length	6mm
Height Seated (Max)	1mm
Width	6mm
RoHS Status	Non-RoHS Compliant