CY7B9950AXI Overview
As a clock IC, PLLs is packaged using the Tray method. This clock generator is embedded in the 32-TQFP package. Under reflowing process, this clock generator ic is able to sustain a maximum temperature of 260. 32 terminations can be found in frequency synthesizer. Basically, a voltage of 2.5V should be applied to this electronic frequency generator. LVCMOS, LVTTL is designed as this clock generator's input. 1 circuits are implemented to access the electronic component's full performance. This clock-based frequency generator provides a frequency up to 200MHz Max. This component can be conveniently installed on the panel thanks to the Surface Mount. The maximal supply voltage this clock generator would take is 2.625V. The supply voltage for this frequency synthesizer should be kept above 2.375V for safety considerations. Clock PLL works with 2.375V~3.63V supply voltage provided. The ambient temperature should be set at -40°C~85°C, which is estimated by the test statistics. This is a clock generator compatible with LVTTL logic levels. This electronic component can be classified as a Clock Buffer, Fanout Distribution. This clock-generating IC is a 32-bit device designed explicitly for microprocessors. According to the base part number CY7B9950, its related parts can be found. There is an available 32 pin on the clock generators. RF synthesizers can handle voltages up to 3.3V. For better clock signal output, this clock PLL is featured with ALSO OPERATES WITH 3.3V SUPPLY. Clock PLL is facilitated with 8 signal outputs to magnify output frequency as high as possible. This clock generator offers low timing skew at 0.65 ns Max. You can find similar clock generators by searching for the 7B family.
CY7B9950AXI Features
Available in the 32-TQFP
Supply voltage of 2.5V
Operating supply voltage of 3.3V

CY7B9950AXI Applications
There are a lot of Cypress Semiconductor Corp
CY7B9950AXI Clock Generators applications.

Instrument
Automatic test equipment
Wide area power system
Digital circuits
Wireless base station for LTE, LTE-advanced
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks

Factory Lead Time	15 Weeks
Contact Plating	Gold, Tin
Mounting Type	Surface Mount
Package / Case	32-TQFP
Surface Mount	YES
Number of Pins	32
Operating Temperature	-40°C~85°C
Packaging	Tray
Published	2013
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	32
ECCN Code	EAR99
Type	Clock Buffer, Fanout Distribution
Terminal Finish	Matte Tin (Sn)
Additional Feature	ALSO OPERATES WITH 3.3V SUPPLY
Voltage - Supply	2.375V~3.63V
Terminal Position	QUAD
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	2.5V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	CY7B9950
Output	LVTTL
Pin Count	32
Number of Outputs	8
Operating Supply Voltage	3.3V
Supply Voltage-Max (Vsup)	2.625V
Supply Voltage-Min (Vsup)	2.375V
Number of Circuits	1
Quiescent Current	2mA
Frequency (Max)	200MHz
Family	7B
Input	LVCMOS, LVTTL
Ratio - Input:Output	1:8
Max I(ol)	0.024 A
PLL	Yes
Differential - Input:Output	No/No
Prop. Delay@Nom-Sup	0.25 ns
Divider/Multiplier	Yes/Yes
fmax-Min	200 MHz
Same Edge Skew-Max (tskwd)	0.65 ns
Duty Cycle	52 %
Length	7mm
Width	7mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free