XC95144XL-10TQ100C Overview 144 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.The item is enclosed in a 100-LQFP package.The device is programmed with 81 I/O ports.It is programmed to terminate devices at 100.There is a QUAD terminal position on the electrical part in question.The device is powered by a voltage of 3.3V volts.It is recommended that the chip be packaged by Bulk.Ensure its reliability by operating at 0°C~70°C TA.It is recommended to mount the chip by Surface Mount.FPGAs belonging to the XC9500XL series contain this type of chip.With 100 pins programmed, the chip is ready to use.3200 gates are used to construct digital circuits.If high efficiency is desired, the supply voltage should be kept at 3.3V.It is recommended that data be stored in FLASH.The pins are 100.Initially, the maximum supply voltage (Vsup) is 3.6V.This frequency is 100MHz.An elementary building block consists of 8logic elements/cells.
XC95144XL-10TQ100C Features100-LQFP package
81 I/Os
The operating temperature of 0°C~70°C TA
100 pin count
100 pins
XC95144XL-10TQ100C ApplicationsThere are a lot of Xilinx Inc.
XC95144XL-10TQ100C CPLDs applications.
Digital systems
Portable digital devices
Handheld digital devices
Battery operated portable devices
Complex programmable logic devices
Digital designs
Field programmable gate
Address decoding
D/T registers and latches
Synchronous or asynchronous mode
| Factory Lead Time | 10 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Surface Mount | YES |
| Number of Pins | 100 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Bulk |
| Series | XC9500XL |
| Published | 1996 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Programmable Type | In System Programmable (min 10K program/erase cycles) |
| Number of I/O | 81 |
| Memory Type | FLASH |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Number of Logic Elements/Cells | 8 |
| Number of Gates | 3200 |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 144 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Length | 14mm |
| Height Seated (Max) | 1.6mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
XC95144XL-10TQ100C Datasheet
+8613715157867