74GTLPH16912GRG4 Overview
Embedded in the TSSOP package, it is available for you to use.Tape & Reel (TR) is the way in which it is packaged.When it comes to terminating a transmission line, there are 56 terminations.This device is powered by a supply voltage of 3.3V which is applied to it.56 pins are present on this board.In addition, it is designed with a pin number of 56.There are 18 bits in this electronic part, which means it is designed in such a way.There is a maximum voltage of 3.45V supported.In order for the machine to operate, the supply voltage must be 3.15V.Mounting this electronic component is done using the Surface Mount method.2 terminations are used to end transmission lines by matching their characteristic impedance with the device.In the world of electronics, this electronic device belongs to the family of GTLP.This device has been rated to be suitable for TAPE AND REEL based upon the reliability of its performance.A high level of efficiency is achieved by maintaining the supply voltage at 3.3V.In order for the system to operate properly, the operating temperature should be higher than -40°C.Level translators is recommended to work at a temperature lower than 85°C.Because it features 50mA output current, maximum design flexibility can be achieved.
74GTLPH16912GRG4 Features
TSSOP package
56 pin count
56 pins

74GTLPH16912GRG4 Applications
There are a lot of Texas Instruments
74GTLPH16912GRG4 voltage translators & level shifters applications.

SMBus
SDIO
UART
I2C
Automotive
Personal computing
Automotive infotainment
Advanced Driver Assistance System (ADAS)
Telematics
Handset

Mount	Surface Mount
Package / Case	TSSOP
Number of Pins	56
Weight	252.792698mg
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	56
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
HTS Code	8542.39.00.01
Packing Method	TAPE AND REEL
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3.3V
Terminal Pitch	0.5mm
Pin Count	56
Operating Supply Voltage	3.3V
Temperature Grade	INDUSTRIAL
Max Supply Voltage	3.45V
Min Supply Voltage	3.15V
Number of Ports	2
Nominal Supply Current	50mA
Current - Output	50mA
Number of Bits	18
Propagation Delay	6.5 ns
Family	GTLP
Logic Function	Transceiver
Direction	Bidirectional
Output Characteristics	3-STATE
Output Polarity	TRUE
Max I(ol)	0.05 A
Trigger Type	POSITIVE EDGE
High Level Output Current	24mA
Low Level Output Current	24mA
Control Type	INDEPENDENT CONTROL
Translation	GTL/P & LVTTL
Length	14mm
Height Seated (Max)	1.2mm
Width	6.1mm
Radiation Hardening	No
RoHS Status	RoHS Compliant
Lead Free	Contains Lead