74LVCH8T245DGVRG4 Overview
Embedded in the TFSOP package, it is available for you to use.When it comes to terminating a transmission line, there are 24 terminations.This device is powered by a supply voltage of 1.8V which is applied to it.24 pins are present on this board.In addition, it is designed with a pin number of 24.There is a maximum voltage of 5.5V supported.In order for the machine to operate, the supply voltage must be 1.65V.Mounting this electronic component is done using the Surface Mount method.Logic ICs it uses are of the BUS TRANSCEIVER type.2 terminations are used to end transmission lines by matching their characteristic impedance with the device.In the world of electronics, this electronic device belongs to the family of LVC/LCX/Z.There is a 3.3V power supply used in the operation of the machine.This device has been rated to be suitable for TAPE AND REEL based upon the reliability of its performance.In order for the system to operate properly, the operating temperature should be higher than -40°C.Level translators is recommended to work at a temperature lower than 85°C.This device has a total of 1 elements.
74LVCH8T245DGVRG4 Features
TFSOP package
24 pin count
24 pins
3.3V power supplies
1 elements

74LVCH8T245DGVRG4 Applications
There are a lot of Texas Instruments
74LVCH8T245DGVRG4 voltage translators & level shifters applications.

SMBus
SDIO
UART
I2C
Automotive
Personal computing
Automotive infotainment
Advanced Driver Assistance System (ADAS)
Telematics
Handset

Mount	Surface Mount
Package / Case	TFSOP
Number of Pins	24
Weight	59.987591mg
JESD-609 Code	e4
Pbfree Code	yes
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	24
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Packing Method	TAPE AND REEL
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	1.8V
Terminal Pitch	0.4mm
Pin Count	24
Number of Elements	1
Power Supplies	3.3V
Temperature Grade	INDUSTRIAL
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Number of Ports	2
Propagation Delay	23.8 ns
Family	LVC/LCX/Z
Logic Function	Inverting, Transceiver
Direction	Bidirectional
Output Characteristics	3-STATE
Output Polarity	TRUE
Logic IC Type	BUS TRANSCEIVER
Number of Bits per Element	8
Prop. Delay@Nom-Sup	6.2 ns
High Level Output Current	32mA
Low Level Output Current	32mA
Control Type	COMMON CONTROL
Translation	N/A
Length	5mm
Width	4.4mm
Radiation Hardening	No
RoHS Status	RoHS Compliant
Lead Free	Contains Lead