AD5161BRM10-RL7 Overview
Package 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) contains it.At Volatile, this pentometer is stored for the first time.This digital potentiometer includes 1 embedded circuits.The digital analogic is secured using this package Tape & Reel (TR).256 taps protect this pentometer against overcurrent.256 positions make up the pentometer.A termination of 10 is intended.The following programmable potentiometer includes 1 functions.Based on the picture, the total resistance of the speed potentiometers is 10000Ohm.The performance of the product is powered by 3V.On the digi devices, you can see the 10 pins.In general, Surface Mount is recommended for mounting.It can supply voltages up to 2.7V~5.5V.For this digital potentiometer, there is a temperature range of -40°C~125°C.Flow can be restricted using 10kOhm.Pentometer belongs to the family AD5161.The Surface Mount mounts digital potentiometer.10 pins are present on this potentiameter.It is possible to find Cascade Pin, Selectable Address using this digital variable resistor.Potentiometers conduct when the supply voltage is 5.5V.At 3/5V, it delivers voltage.There are the following additional features of this digital potentiometer: IT CAN ALSO OPERATE FROM A 5V NOMINAL SUPPLY; 2-WIRE SERIAL CONTROL INTERFACE IS ALSO POSSIBLEThe supply current needs to be operated within the range of 3μA in order to deliver its performance.When the frequency is set to 25MHz, it maintains high accuracy.The maximum supply current can be set to 3μA.As long as 3μA is set, potentiameter consumes quiescent current.A bandwidth of 1.2MHz is available for data transfer.
AD5161BRM10-RL7 Features
Available in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package
1 Circuits
Mounting Type: Surface Mount
Operate temperature at the range of -40°C~125°C
10 pins
Operate supply voltage at the range of 5.5V
Quiescent Current at 3μA

AD5161BRM10-RL7 Applications
There are a lot of Analog Devices Inc.
AD5161BRM10-RL7 Digital Potentiometers applications.

Refrigerator
Programmable computer
Power supply
Power meter
Automatic detection of equipment
Optic fiber network
Adjusting the LCD Display
Voltage control
Replaces mechanical potentiometers
Matching Linear Impedance

Contact Plating	Lead, Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Number of Pins	10
Operating Temperature	-40°C~125°C
Packaging	Tape & Reel (TR)
Tolerance	±30%
JESD-609 Code	e0
Feature	Cascade Pin, Selectable Address
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	10
ECCN Code	EAR99
Temperature Coefficient	45 ppm/°C
Resistance	10kOhm
Number of Positions	256
Additional Feature	IT CAN ALSO OPERATE FROM A 5V NOMINAL SUPPLY; 2-WIRE SERIAL CONTROL INTERFACE IS ALSO POSSIBLE
Voltage - Supply	2.7V~5.5V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	1
Supply Voltage	3V
Terminal Pitch	0.5mm
Reach Compliance Code	not_compliant
Frequency	25MHz
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	AD5161
Pin Count	10
Qualification Status	Not Qualified
Operating Supply Voltage	5.5V
Power Supplies	3/5V
Configuration	Potentiometer
Interface	I2C, SPI
Number of Circuits	1
Operating Supply Current	3μA
Nominal Supply Current	3μA
Memory Type	Volatile
Max Supply Current	3μA
Quiescent Current	3μA
Bandwidth	0.6 kHz
Taper	Linear
-3db Bandwidth	1.2MHz
Number of Taps	256
Total Resistance	10000Ohm
Resistance - Wiper (Ω) (Typ)	50
Resistor Terminal Voltage-Max	3V
Length	3mm
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead