AD5322BRMZ Overview
A 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package is provided with this component. An electrical supply voltage of 3V powers it. An FPGA module can be attached to a development board with a Surface Mount-pin. During the operation of the system, the operating temperature should remain within the range of -40°C~105°C. It is for space saving reasons that this FPGA model is contained in Tube. As a whole, it has 10 terminations. Related parts can be found by using its base part number AD5322. 10 pins are designed into the device. A 5V-volt supply allows designers to fully utili5Ve its flexibility. In addition to this, it has 10 pins. A maximum voltage of 5.5V can be supplied to it. As long as the supply voltage is at least 2.5V, it is able to work properly.
AD5322BRMZ Features
10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package
10 pin count
10 pins
Minimal input voltage of 2.5V

AD5322BRMZ Applications
There are a lot of Analog Devices Inc.
AD5322BRMZ Digital to Analog Converters (DAC) applications.

Data Distribution System
Digital Potentiometer
Software Radio
Wireless infrastructure:
WCDMA, CDMA2000, TD-SCDMA, WiMAX
Wideband communications:
LMDS/MMDS, point-to-point
Instrumentation:
RF signal generators, arbitrary waveform generators
Mobile Communications

Lifecycle Status	PRODUCTION (Last Updated: 2 weeks ago)
Factory Lead Time	8 Weeks
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Surface Mount	YES
Number of Pins	10
Operating Temperature	-40°C~105°C
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	10
ECCN Code	EAR99
Max Power Dissipation	2.5mW
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	AD5322
Pin Count	10
Output Type	Voltage - Buffered
Operating Supply Voltage	5V
Polarity	Unipolar
Interface	SPI, Serial
Max Supply Voltage	5.5V
Min Supply Voltage	2.5V
Nominal Supply Current	300μA
Power Dissipation	2.5mW
Number of Bits	12
Max Output Voltage	5.5V
Min Input Voltage	2.5V
Slew Rate	0.7 V/μs
Architecture	String DAC
Max Input Voltage	5.5V
Converter Type	D/A CONVERTER
Reference Type	External
Data Interface	SPI, DSP
Differential Output	No
Resolution	1.5 B
Sampling Rate	125 ksps
Voltage - Supply, Analog	2.5V~5.5V
Min Output Voltage	2.5V
Voltage - Supply, Digital	2.5V~5.5V
Settling Time	10μs
Linearity Error-Max (EL)	0.1953%
Integral Nonlinearity (INL)	8 LSB
Input Bit Code	BINARY
Number of Converters	2
Conversion Rate	125 ksps
INL/DNL (LSB)	±2, ±0.2
Height	850μm
Length	3mm
Width	3mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead