AD532SH Overview
Packing materials Bulk are used.This module is embedded within the TO-100-10 Metal Can package in order to provide cost-effectiveness.There is a considerable amount of use of 4-Quadrant bits per stage.The device operates at a voltage of 15V.In this case, the supply voltage is nominally negative and referred to as -15V.There is a modulated radio-frequency signal in the range of 1MHz.In order to prevent signals from reflecting off the other end of the transmission line, there are 10 terminations.A number of electronic parts with a similar part number can be found under AD532.It is a type of 10-pin electronic component noted for its superior performance and high quality.For mounting the component on the PCB, Through Hole is used.It is recommended that the device operate at a temperature of 125°C.Temperatures below -55°C should be maintained to ensure proper operation of electronic devices.In addition, it is ideally suited for the operating supply voltage of 6mA.For a dual supply, this voltage should be higher than 10V.Generally, dual supply voltages should be lower than 22V.The ANALOG MULTIPLIER OR DIVIDER integrated circuit operates on an analog basis.There is a modulated radio-frequency signal in the range of 1MHz.Due to its capability to handle a maximum input voltage of 10V, designers can make full use of its versatility.Dual supply voltage 15V is used to operate this device.There is the possibility of storing 4 bits of information.The unit can operate at 22V volts of supply voltage.For failure prevention, the frequency should not exceed 1MHz.From the output end, it is 10V that is released.This device uses 1 circuits to achieve its specific functions.A high degree of reliability can be attained by keeping the supply current below 6mA.
AD532SH Features
Supplied in the TO-100-10 Metal Can package
Bandwidth of 1MHz
Operating supply current of 6mA
Operating supply voltage of 22V

AD532SH Applications
There are a lot of Analog Devices Inc.
AD532SH Analog Multipliers & Dividers applications.

Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering
Signal operation
Video and image computer boards
Medical instruments
Television broadcasting equipment
Displayers for aircraft and air transportation control systems

Lifecycle Status	PRODUCTION (Last Updated: 1 month ago)
Factory Lead Time	10 Weeks
Contact Plating	Lead, Tin
Mount	Through Hole
Package / Case	TO-100-10 Metal Can
Number of Pins	10
Packaging	Bulk
JESD-609 Code	e0
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	10
ECCN Code	EAR99
Terminal Finish	Tin/Lead (Sn/Pb)
Max Operating Temperature	125°C
Min Operating Temperature	-55°C
Terminal Position	BOTTOM
Terminal Form	WIRE
Supply Voltage	15V
Base Part Number	AD532
Function	Analog Multiplier/Divider
Output Voltage	10V
Operating Supply Voltage	22V
Temperature Grade	MILITARY
Number of Circuits	1
Analog IC - Other Type	ANALOG MULTIPLIER OR DIVIDER
Operating Supply Current	6mA
Nominal Supply Current	6mA
Max Supply Current	6mA
Number of Bits	4
Accuracy	1 %
Slew Rate	45 V/μs
Max Input Voltage	10V
Bandwidth	1MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Settling Time	1 μs
Max Dual Supply Voltage	22V
-3db Bandwidth	1MHz
Max Frequency	1MHz
Min Dual Supply Voltage	10V
Dual Supply Voltage	15V
Number of Bits/Stages	4-Quadrant
REACH SVHC	Unknown
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead