AD8231ACPZ-WP OverviewIt is packaged in an 16-WQFN Exposed Pad, CSP-case that protects the operational amplifiers from damage. An op amp of this type is a Instrumentation-type. As far as the packaging is concerned, buffer op amp is delivered in a Tray case. It is estimated that there will be at least 16 terminations this year. A total of 16 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. In total, the buffer amplifier consists of 16 pins. Op amp ic rates 15μV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. A supply current of 5mA can be used to operate this linear amplifier. This op amp ic has 2 circuits. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. There are 1 elements in this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 5V. It is important that the op amp resistance stays within the range of 10GOhm.
AD8231ACPZ-WP Features16 Pins
supply voltage of 5V
Output Type: Rail-to-Rail
Resistance of 10GOhm
AD8231ACPZ-WP ApplicationsThere are a lot of Analog Devices Inc.
AD8231ACPZ-WP Instrumentational OP Amps applications.
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Factory Lead Time | 8 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WQFN Exposed Pad, CSP |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 10GOhm |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AD8231 |
| Pin Count | 16 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Number of Circuits | 2 |
| Operating Supply Current | 5mA |
| Nominal Supply Current | 4mA |
| Max Supply Current | 5mA |
| Slew Rate | 1.1V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 250pA |
| Voltage - Supply, Single/Dual (±) | 3V~5V ±1.5V~2.5V |
| Output Current per Channel | 70mA |
| Input Offset Voltage (Vos) | 15μV |
| Bandwidth | 2.7MHz |
| Gain Bandwidth Product | 7MHz |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 4μV |
| -3db Bandwidth | 1MHz |
| Dual Supply Voltage | 2.5V |
| Input Offset Current-Max (IIO) | 0.0005μA |
| Non-linearity-Max | 0.005% |
| Height | 950μm |
| Length | 4mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8231ACPZ-WP Datasheet
+8613715157867