Add to cart |
Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) Exposed Pad case. Buffer amps of this type are called General Purpose-types. Linear amplifier is delivered in a Tube case. The number of terminations approaches 8. There are a total of 8 pins on this op amp. This linear amplifier should be powered by an 24V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. Linear amplifier includes 8 pins. There is an input offset voltage of 200μV for this buffer op amp. For this electronic part, it is recommended that you mount it with type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . As long as the supply current of the chip does not exceed 1.7mA, this op amp ic can operate. The voltage gain should stay at 106dB. The op amp ic has 1 channels on it. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. As a result, linear amplifier's quiescent current is 1.7mA.
8 Pins
supply voltage of 24V
106dB voltage gain
Output Type: Rail-to-Rail
There are a lot of Analog Devices Inc. ADA4700-1ARDZ Instrumentational OP Amps applications.
Multimedia playback equipment
pH (acidity)
PDA
Thermocouples
Medical instruments
Navigation
Exponential operation circuits
Proportional counter tubes
Hand-held batteries
High gain DC amplifier
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Factory Lead Time | 8 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4700 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | +-5/+-50V |
| Number of Channels | 1 |
| Operating Supply Current | 1.7mA |
| Nominal Supply Current | 1.7mA |
| Quiescent Current | 1.7mA |
| Slew Rate | 20V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 108 dB |
| Current - Input Bias | 15nA |
| Voltage - Supply, Single/Dual (±) | ±5V~50V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 200μV |
| Bandwidth | 3.5MHz |
| Neg Supply Voltage-Nom (Vsup) | -24V |
| Unity Gain BW-Nom | 3500 kHz |
| Voltage Gain | 106dB |
| Average Bias Current-Max (IIB) | 0.05μA |
| Power Supply Rejection Ratio (PSRR) | 130dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 55V |
| Settling Time | 4 μs |
| Current - Output / Channel | 72mA |
| Bias Current-Max (IIB) @25C | 0.03μA |
| Dual Supply Voltage | 24V |
| Neg Supply Voltage-Max (Vsup) | -55V |
| Max Junction Temperature (Tj) | 150°C |
| Ambient Temperature Range High | 85°C |
| Height | 1.75mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4700-1ARDZ Datasheet
+8613715157867